[Wills Rcsb Build]

That looks like a pre-fabbed bucket? I looked through your thread and I must have missed where you got that? What is it, an what do you think of the quality? And the dual pump harness? Hobbs switch or both on all the time?

Looks like a Lonnie's setup? I'm thinking about buy one of them to be done with all my fuel problems.

its the stock 04 returnless bucket, i hacked up the bottom of the bucket to fit the filters in.

both pumps will be on at all time, i have heard a few bad stories with running one off a switch for WOT.

hopefully get the rest of the fittings i need tomorrow to finish this up.

 

 

 

[Wills Rcsb Build]

Got the pumps mounted and got the Y fitting installed.

Both pumps go into the Y with 3/8" fittings and come out with 1/2"

 

Still need to get fittings to run -8 off the top of the tank.

 

[supercharged ss vs gt stang?]

worst feeling ever when you loose to a poney

[Wills Rcsb Build]

pulled the tank and started on the fuel system.

[Wills Rcsb Build]

 

[Wills Rcsb Build]

started on the exhaust today, still waiting for the mufflers to show up.

 

[compliments]

i miss those lol

[NEW LSX Bowtie 427 For Boosted ARP Callies JE]

Mmmmmmmm

[First Truck, 2005 Silverado SS!]

welcome to the site, truck looks mint

[Updated pics. A couple new ad on's]

trucks looking sexy! and all the blue carbon

[Custom SS in NJ CHEAP!!]

Sweeeeet...... Racing stripes!!!!!

[to return or not to return. that is the question...]

Welcome back man! I'm also not around here much anymore.

Once I get my truck running again ill prob be around a lot more.

[Air cooled engine mech?]

Get the gun....

[To c-notch or not to c-notch?]

I would put it in now unless you wanna feel jarring back pain every time you hit a bump...

[Wills Rcsb Build]

90 degree finally came in so i did a bit of mock up for mounting the bov and meth, should work fine their?

 

also had to cut up the top rad hose and mount it lower with a 90 degree.

 

 

 

 

 

[L92 top end swap hp gains?]

Depends on what or how many stickers you add to your truck

[Problem (reduced engine power)]

what i have been hearing alot lately is that its always a problem with the tb harness, check for a broken wire.

[Washington State Pacific Northwest Meet]

ill be down for a meet anytime when my trucks back together.

[160 stat]

truck runs cooler so you can pull abit more timing.

[Blacked out my Bowtie]

looks good, please do not spray paint ur rims lol

[Wills Rcsb Build]

did a little work on the intake for the blower, still waiting for the 4" 90 degree to show up for the tb.

 

[Supporting member]

dont worry about it

[potato land build , 9's@140mph+ goal]

9's ehh... ill see you their

[Wills Rcsb Build]

Did you uses the same color wiring and solder all connections?

 

Sent from my DROID BIONIC using Tapatalk 2

 

 

yes all the wires are soldered together, on the fuel injectors i used brown and green.

 

the coil pack harness i used all random colours, non are the same.

 

you know you wanna do a full wire tuck will.

haha ill be moving a few other wires but nothing crazy

[Wills Rcsb Build]

waiting for a 90 degree silicone hose to show up, I can then mount the bov and meth injection.

 

I ordered a lingenfelter 2 step launch controller, should be here this week.

 

 

extended all the driver side wires to go behind the engine so their not going over the side.

 

also mounted and started hooking up the vacuum manifold.