Jump to content

Eezy

Member
  • Posts

    72
  • Joined

  • Last visited

Posts posted by Eezy

  1. So i did a more accurate draw test and pulled the deck( it went down one mA) and then i pulled the interface harness and the draw went all the way down to 12mA. I'm going to go and get another interface harness tomorrow.....is there a certain type or a better brand that i should get? And thanks for all of yall's help i'm glad to finally figure out the problem.

  2. My alarm is the crime-stopper II with remote start and auto driver window roll-up. The in-dash is a Pioneer avh-p4000 i also have two 10" subs with a 750w amp and three additional screen..two in the headrest and one at the bottom of the dash near the center console. As far as waiting for the BCM to rest i would hook up the meter and wait for it to go down because it would be over 1 amp at first, i would usually wait a few minute or maybe a bit more. I'm not sure how long it takes for the BCM to go to sleep. How do i check the deck interface adaptor....with the draw test and unplug it? I will borrow a better meter also....is that so i can get more accurate readings? Thanks for your help.

  3. Took the truck in today and the guy there told me that there was nothing they could do. He said that all vehicles when parked would draw on the battery eventually causing it to drain especially since i have a system and an aftermarket alarm. I told him how long the battery was lasting and he said to buy a new battery and a battery tender or i could take out my alarm and stereo system. I still think it should last longer than five days, so i disconnected the alarm and i'ma do a draw test tommorow. I don't have any lights out or anything like that. I have a feeling its the alarm system, i have a crimestopper informer II. Also my gauges have been messing up, they will just go dead and then the next day they will work. Could that have anything to do with it?

  4. For some reason my truck dies if i let it sit for more than three days. At first i thought it was the battery, so i went and bought an optima red top thinking that would solve my problems. Well, the battery still dies. well i put it off for longer than i should have and now i think my battery has gone bad. So i tore into today to try to find the problem and i couldnt find anything. I searched the forum and found something about a draw test but thats all i found. How do i go about doing this? what do i connect the voltmeter to so i can get a reading? and then i just start pulling fuses?

  5. I'm look to get a hitch for my 03 SSS. I'm moving home in about a month and i need to pull a trailer but when i bought my truck it didn't have one. Im not looking to spend alot of money but i kinda need one. If anybody has one or knows where to get one for cheap that would be greatly appreciated. Thank you in advance.

     

    Eezy

×
×
  • Create New...