[Finally!]

Very Nice!  Offset?

[2004 Silverado SS 6.0 AWD LQ9 to LS3 Build]

In stock for, you are putting approx 280RWHP (345HP is crank

I've done all of the mods mentions but I warn against the BTR Stage 3 unless you don't mind less daily drivability.  I agree in a trans rebuild with a dedicated trans cooler.  I've had my SS  for 12 years and had to do the transmission 3 times and considering a 4th rebuild.

Good luck.

[Silverado SS 20s Wheels]

FYI, you can find the caps on eBay

[Who has the Z06 brake conversion installed and using it?.z zzz]

These are GM OEM C6Z06 calipers which are manufactured by PBR which is Baer.  I had the Baer Logo added when I had the calipers powder coated.

 

Baer Rotor 6910962 Front Driver Side
Baer Rotor 6920962 Front Passenger Side

Rotor Outside Diameter (in):15.00 in.
Rotor Thickness (in):1.100 in.

 

Baer Rotor 6910526 Rear Driver Side
Baer Rotor 6920526 Rear Passenger Side

Rotor Outside Diameter (in):14.00 in.
Rotor Thickness (in):1.025 in

 

[Who has the Z06 brake conversion installed and using it?.z zzz]

[When do you consider your mileage to be too high?]

153k on mine. Trans went out at 145k but that is because I tow a 24' enclosed trailer on occasion. I get compliments on the truck all the time.

[When do you consider your mileage to be too high?]

143K on my 2005

[Tru cooler]

I would just get pieces from the hardware store or do what i did and use the supplies pieces in the kit. I used all from the kit (took my time and did it right a professional.) Save the 75 bucks. Im pulling my grille off soon so i will take pics on how i mounted mine. Even has the front air temp. Sensor righr there like factory too!

Please do.......

[Another Z06 brake thread.]

There is definitely an improvement although only 75% of the rotor surface is being used. I did the mod this past spring and used Hawk single pads. Will use EBC pads when I need to replaced the brakes.

 

[Cleaning out my Storage]

ttt

[WTB Engine Cover]

http://www.silveradoss.com/forums/topic/83201-cleaning-out-my-storage/

 

Also have stock engine cover for sale.

 

B

[FS: 2011 Silverado- Lowered with SS appearance and 6.2L Engine]

Nice

[The SS Suburban is gone!, New shop is born Superstreet performance]

LOL! dam sticky keys !!!! cant edit title ? darn " SUBURBAN"

I hear you are the man to get the Baer calipers from for the Z06 caliper conversion. Is this true? If so I need a price for all 4. Tried to PM you but your box is full.

 

B

 

Thanks

 

B

[Cleaning out my Storage]

Storage Unit Clean out. Stock 05 Silverao SS Items.

 

Engine covers - passenger and drivers side

 

 

 

 

$70.00 plus shipping

 

 

Air hose unit from airbox to throttle body

$30 plus shipping

 

PM or text or Email

719-360-0065

[email protected]

Call

Send SMS

Add to Skype

You'll need Skype CreditFree via Skype

[Spongy Brake Pedal]

Thanks for the posts, I am having the same problem. Will follow your lead.

[Baer rotors for zo6 brakes]

Can someone please clarify where to get the rotors? I have the Z06 calipers and the brackets (Rudy).
Where do I get the correct front and back Baer rotors for my 2005 SS? There seems to be
conflicting information. Sorry to beat a dead horse but want to be sure.

 

B

[Carbon fiber dash insert and steering wheel]

Still for sale?

[front end clunking?]

I had to replace the steering shaft, took a while to figure out what is was. No problems since.

[Spongy Brake Pedal]

I'm interested in your outcome, having similar problems.

[LS7 Motor Swap Question]

I have both the a 05 SSS and a C6Z06. I hope you realize the LS7 is a dry sump which requires extra plumbing on top of the reluctor issue. I think the LS3 would be easier to retrofit IMHO.

[02 Sensors]

I am getting 13ish mpg (city) with CAI, headers, aftermarket cats, Magnaflow and Wheatley tune. I have been thinking about turning off the front and rear cats. That may increase my MPG? I thought the PCM uses the O2 sensors to adjust fuel flow?? Any advise would be appreciated.

 

B

[Lt Header Install]

You can do it yourself, it just takes patience. I installed my Dynatech headers w/ cats in about 5 hours (leisurely) w/ the assistance of a friend.......use a lift if possible. Drove to the muffler shop to weld in a dual in/out Magnaflow, .....got a lot of stares driving to the muffler shop but it was fun.

 

[Boost Mpg]

I get an average of 12 mpg kinda sucks but wouldn't trade the truck for anything

 

 

Getting 13 in the city...........................

[Magnaflow]

I'm running the 18" Magnaflow with built in X pipe. It sounded great at idle but at 2500 rpm it had a bad drone. I ended up adding two Magnaflow inline resonators. That fixed the problem. If I had to do it over I think that I would have just went with the 22" muffler.

 

Did you keep the X pipe? Pictures? I have the same setup but want to quiet it down a bit, especially on the highway.

 

B

[Rear Window Noise]

That's what I bought. Didn't help on the passenger side. Just as noisy as ever.

 

Same here, I bought these but they didn't work. I contacted the seller and he sent me some slightly longer (for a fee of course), they still didnt help. $30 + down the drain.