syclone2910
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by syclone2910
-
-
-
-
Thanks L8ERBRO, I just ordered the Dynatech Supermaxx No Cats = 715-84230 and Magnaflow dual 15840 kit. Should sound great.
I have a basic cold air kit and a mildly built trans with a 2300 stall. Nothing crazy.
I would like to have a nice lope sound though and have been thinking about adding a cam/springs package.
I do have a TSP 224R cam sitting here on the shelf I was going to use for another project.
Thanks
Will
-
Anyone able to send me a link to where I can buy everything I need to bolt on a complete exhaust package including Headers, mid pipe, and cat back? I will go with either Catted or Cat less. I don't care. I just need a complete exhaust from the header flanges to the tail pipe tips. Single or dual. I do want them to exit at the back after the rear wheels somewhere.
I have a mildly built trans, 2300 stall, and CAI. Thats it. I have HP Tuners and paid for the 2 credits to make changes to the truck already so I can turn off the 2nd O2 sensors if need be. I have a TSP 228R cam sitting here I could stick in just for giggles if need be.
Thank You,
Will
-
Anyone ? ? ?
-
The floor/rear cab area harness.
-
Looking for a complete 2003 interior wiring harness. Anyone parting one out or know of anyone that is? I tried calling GM but they no longer make one for sale. I have an 03 AWD with manual Heat/AC if that helps.
Top $$$ paid for a good uncut harness.
Thanks
Will
-
Do you know the part #?
I believe it is:GM Part # 19120553I have one sitting around freshly painted that I'm not using. It's oem and has the oem brackets. I had considered trying to work a deal with someone for a gaylord speedster bed cover.
Well, I do not have a gaylord speedster bed cover but how much cash would you take for it shipped to me in Louisville, KY 40206?
Thanks
Will
-
-
Looking for a SS Intimidator wing. I have read to many stories about the fiberglass ones so I would like an OEM if at all possible. If you have one or know of one for sale somewhere can you please let me know.
Thank You
Will
-
Where in Louisville are you at? I work downtown and live in Bullitt county.
My shop is off Bishops lane. 4603 Astor Rd to be exact. Its really just a big toy box LOL I run my arcade business out of there.
http://www.custommulticades.com
Will
-
I just finished B&B Thing looks awesome everywhere connection to the exhaust tip. No cats and minor drone.
Can you give me a link to where you bought it all or part numbers so I can make sure I get all the right parts? Thanks
-
I just checked them out and the headers he linked he also linked to them at summit racing. It shows 07+ silverado 2wd and 4wd. Are you sure they will fit the 03 AWD SS? Its not on the list. Thanks
-
I have already gone in with HP turners and reworked the tune a little and adjusted for the monster trans.
-
OK, So if I go with Dynatech headers and a corsa touring catback can I use my factory catted mid pipe? I think thats what its called
-
Hello, I have read about every post under the Exhaust section on this forum. I have googled and looked on other truck forums. I can not find a definitive answer to my question.
I have a 2003 Silverado SS
K&N filter stock intake tube
Monster trans
2300 stall
I am looking for a complete exhaust that will BOLT on.
I would like the following to be included:
Full length headers
Cats or No cats I don't care *** No Emissions around here ***
Dual in and Dual out
same side exit or split exit I dont care
I just want to order it and bolt it on. I am tired of having to source a part or get something welded that did not fit correctly.
I do not open my hood for anyone as this is a daily driver. I have a couple 800+hp cars so I have no intention of modding this further.
I would also like to stay low on the budget so painted headers will work for me.
Thank You and if your the one that helps me out if your ever around Louisville, KY stop by and I will buy you a few beers
Thanks
Will
-
Bought my 03 SSS and the last owner has it lowered.I would like to get it back up where it was originally.
Does anyone have the stock shackles and torsion keys they would sell me?
I would even trade someone my keys and shacke hangers for their stock ones.
Looks like its about a 2/3 drop setup. I could be wrong. Its just to low for my liking.
I am located in Louisville, KY 40218
Thank You
Will Robbins
-
Are you still making these input shafts for the 4l80e? If so I would like to buy one.
Thank You
Will
Nothing Special - My 03 SS
in Video & Photography
Posted
I am in the middle of switching over to the Holley EFI Dominator. With a 72BB Turbo, Fully built block, ALKY injection, and a 4L80E swap it should be around 750-800hp and 900tq. It still looks 100% stock inside with the exception of the Holley Digital Dash in place of the factory radio. Don't forget its still AWD. 9's on street tires and pump gas.