bumgardner77
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by bumgardner77
-
-
I've done 2 oil changes since I got it. 1 when I bought it and 2nd one when I replaced oil pump. I've been told before that it could be the oring not right size and causing oil pump to suck up air? Is that possible? I bought the OEM pump and oring from a dealership
-
Doesn't consume oil. Low oil pressure message comes on when I come to a stop and oil pressure drops to 0psi. The engine light is on but I believe it's for the cats
-
So I finally had the chance to buy an ss. its a 2004 with a lot of tlc needed. my biggest concern is that when I come to a stop there is no oil pressure but when I start driving the oil pressure comes up to about 20 psi and stays there while driving. I replaced oil sending unit sensor and oil pump but no change. I am at the point of rebuilding with all new cam and rod bearings. Does anyone have any other opinions what might be the issue? If I rebuild does anyone recommend a good camshaft that does not need to be tuned?
Engine help...
in My New Truck
Posted
I decided to tear apart the engine. Found the 2nd cam bearing has spun and came out with the cam. It's all the machine shop now getting new cam bearings