Phoenix33759

I have 42 lb injectors for sale used on a procharger application. Worked great, I sold the truck...new owner was more interested in looks rather than performance. I have sold everything but the injectors. $225 shipped. Nothing wrong with them, used about 8k miles or so. contact me at [email protected] Thanks......

Brake kit....sold!! Wheels...sold!!! procharger pending sale...will go on ebay soon

unfortunatly not that much....how horrible..theft recovery. I have mostly aftermarket things that I am selling. Let me know if there is anything I can help you with. Good luck...

I have somone who wants the truck ....but the truck will not run due to the mods done to the ecu for the supercharger, header, exhaust...etc. I need to turn the truck back to stock. I need an PCM/ ECU asap.....

Not sure you would have to contact procharger....the same brackets are used for the 5.3 and 6.0.....

Must sell Procharger, with injectors. Has 2 pulleys, I installed procharger on 2003 was making great power. It was the P1SC with 2 core intercooler, and pump with 42lb injectors. Ran custom tune rather than FMU fuel management. Truck would pull. Never tracked, dynoed at 437hp when 3rd gear slipped. Never back to the dyno after trans FLP swap. truck has 27000 miles all mods have less than 10k I also have the front eradispeed rotor and braket assembly 22" rims and tires for sale....pending sale though Procharger with injectors $2200 Brake kit $250 Wheels/ tires $1700

Must sell Procharger, with injectors. Has 2 pulleys, I installed procharger on 2003 was making great power. It was the P1SC with 2 core intercooler, and pump with 42lb injectors. Ran custom tune rather than FMU fuel management. Truck would pull. Never tracked, dynoed at 437hp when 3rd gear slipped. Never back to the dyno after trans FLP swap. truck has 27000 miles all mods have less than 10k I also have the front eradispeed rotor and braket assembly 22" rims and tires for sale....pending sale though Procharger with injectors $2200 Brake kit $250 Wheels/ tires $1700

mine blew apart a while ago... the belt tensioner is different on the ls1. At least on mine, it would not fit...went with the factory again. I hope it holds up to the boost this time.

Not a chance... that car will go my grave with me!!!!

and a few more..... looking for 29,900......

more:

a few more:

p1sc with extra pulley. truck is strong... pictures:

Guys it looks like a am putting mytruck up for sale ...looking for a good home!!! Billit grill (upper and Lower) lowered- belltech eradispeed front brakes tinted glass 22" rims procharged with 12lb pulley with FMU delete 42lb injectors FLP level 5 trans with 3200 stall custom tune pcm dynatemp header with high flow cats taylor wires and boots in blue h-pipe with 2 40 series flowmasters split rear exhaust denalli burlwood trim with custom gauge pods including steering wheel truck has never been to the track but dyno at 439hp 475tq oil every 5k with mobil one truck is in great shape not daily driven covered in the garage 25,000 miles asking 29,900 email me for more details at: [email protected]

I did something similar backa few years ago...except my interior is burlwood.