04CHASE Posted January 1, 2005 Report Share Posted January 1, 2005 What the heck i noticed bser didnt put a light only reason i noticed is because i was stopped and told so by an officer last night!!!nah just kidding but before tht happens i need to get a light because i noticed it didnt have one anyone rig one up using some l.e.d.s or somthing?.Is it possible to drill fiberglass witout it cracking? Quote Link to comment Share on other sites More sharing options...
rdss Posted January 1, 2005 Report Share Posted January 1, 2005 Yes you can drill it, I have a billet plate cover with a built in light from Styln Concepts, I just need to get it wired in so I do not have the same cop issue. Quote Link to comment Share on other sites More sharing options...
deve8edsilv Posted January 3, 2005 Report Share Posted January 3, 2005 ha ha--ive already had the cop problem. not too worried about it yet. i want a black license plate frame with the light in it. ive only found brushed or polished aluminum. Quote Link to comment Share on other sites More sharing options...
04CHASE Posted January 3, 2005 Author Report Share Posted January 3, 2005 that would look nice,I ordered the one with a built in light from stylinconcepts yesterday i was thinking it would look good in black and just go have a sticker place make a silver ss logo to put on it,well see what happens. Quote Link to comment Share on other sites More sharing options...
PVerspeek Posted January 3, 2005 Report Share Posted January 3, 2005 Or you can use bolts with lights in. I have a set of these at home, can't find a link now. Quote Link to comment Share on other sites More sharing options...
matt rem Posted January 3, 2005 Report Share Posted January 3, 2005 I used the bolts with the lights, I think they came from Summit.I haven't had any problems. Quote Link to comment Share on other sites More sharing options...
SSminneapolis Posted January 3, 2005 Report Share Posted January 3, 2005 Yes you can drill it, I have a billet plate cover with a built in light from Styln Concepts, I just need to get it wired in so I do not have the same cop issue. <{POST_SNAPBACK}> how is that painted and installed roll pan treating you chucky? Quote Link to comment Share on other sites More sharing options...
SS--BLOWN Posted January 3, 2005 Report Share Posted January 3, 2005 StylinConcepts also has a flip-down license plate frame that includes a light: Link I think this is what I am going to use. Michael Quote Link to comment Share on other sites More sharing options...
ssjonathan Posted January 5, 2005 Report Share Posted January 5, 2005 I used a light from a late 90's Lumina. If you notice the light fits real nice above their liscense plat and yu can hardly see it. I used a single light and it shines just enough to see it but not be able to read it quickly!!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.