Big O Posted May 13, 2006 Report Share Posted May 13, 2006 I'm trying to hook up the Aux2Car unit with the PXHGM3 wire harness to allow me audio inputs for my center council screen. I set the pins as per the instruction manual. I do not have XM, so I plugged the wire harness into the aux slot on the back of the deck. I put everything back together and the aux inputs did not work ... I can't switch over to the unit ( doesn't recognize the new inputs ). Is there another step I am missing? TIA Link to comment Share on other sites More sharing options...
Big O Posted May 13, 2006 Author Report Share Posted May 13, 2006 I didn't hook up the 12v continious power ... it said to only do that if you are using the GM-C harness ... is that the problem? I am assuming that is for " charging " ....ipods and crap. Link to comment Share on other sites More sharing options...
Big O Posted May 16, 2006 Author Report Share Posted May 16, 2006 wow ... nobody? ... everyone busted my balls about using an FM transmitter so I switched to the harness ... crazy Link to comment Share on other sites More sharing options...
SuperSport Posted May 16, 2006 Report Share Posted May 16, 2006 Dude, I wish i had the answer, because i want to do this to my truck next. Link to comment Share on other sites More sharing options...
Big O Posted May 16, 2006 Author Report Share Posted May 16, 2006 Link to comment Share on other sites More sharing options...
fast4popper Posted May 16, 2006 Report Share Posted May 16, 2006 <{POST_SNAPBACK}> sorry I have not answered your PM. hook that red wire up to 12volts in your truck. that should fix your problem. i am outta town and I have very limited access to the internet. I will check back with you and see if this solved your problem. Link to comment Share on other sites More sharing options...
Big O Posted May 16, 2006 Author Report Share Posted May 16, 2006 I hooked up the 12v constant and the ground ... works like a charm now ... quieter than the radio but definatly works better than the portable DVD players!!! Thanks for the help !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.