foxySS Posted May 16, 2006 Report Share Posted May 16, 2006 Hey all, I'm going to have a buddy install my walbro GSS340, but I need to know if the wiring harness will match up with our stock fuel pump? The one I bought from racetronix is for Syclone's and Typhoon's. Is there any major wiring work that will need to be done to make it work? Any info is appreciated! Link to comment Share on other sites More sharing options...
BenKey Posted May 17, 2006 Report Share Posted May 17, 2006 Worst case you can just use regular butt connectors. I used them and have had zero problems. Link to comment Share on other sites More sharing options...
chpspecial Posted May 17, 2006 Report Share Posted May 17, 2006 Link to comment Share on other sites More sharing options...
foxySS Posted July 2, 2006 Author Report Share Posted July 2, 2006 Actually, I ran into a problem. The syclone/typhoon (gss340) that I bought only has two wires on it. The factory pump has six wires. Any idea on which direction to go now? Will it still work? Link to comment Share on other sites More sharing options...
BenKey Posted July 2, 2006 Report Share Posted July 2, 2006 A Walbro GSS340 only comes with a 2-wire plug. Link to comment Share on other sites More sharing options...
foxySS Posted July 2, 2006 Author Report Share Posted July 2, 2006 So, how do you link the 6 wires to 2? I wasn't working on it (my friend was,) so I don't know exactly what the wires looked like. Are they color coated so you know which wires go to which? Can you splice the 3 OEM wires into 1 from the fuel pump for each of the two connections? Any advice is appreciated. Link to comment Share on other sites More sharing options...
BenKey Posted July 2, 2006 Report Share Posted July 2, 2006 Stock fuel pump only has two wires - one connection. Not sure how to mate up two to six wires. Get rid of the one with six. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.