wkeil Posted May 20, 2006 Report Share Posted May 20, 2006 Ok I have the pac adapter so I can run an amp with my stock head unit. I got the subthumb box 2 jl 10w3's and a kenwood 1200 watt amp with bass knob. Now I figured out how to get the factory stereo out and take the console apart. My question is how did you run wires to under the rear bench? Did you have to take the seats out and lift the carpet?? Any ideas would be great. thanks! Quote Link to comment Share on other sites More sharing options...
r8rs4lf Posted May 20, 2006 Report Share Posted May 20, 2006 Get the wires to either the drivers or passenger side kick panel and run them under the door sill (plastic piece that you pull up) all the way to the rear. It's pretty simple actually. I just had to install an optical cable from my head unit to my amp and that is just what I did. BTW: Make sure you install the PAC piece behind the radio and not in the console. Quote Link to comment Share on other sites More sharing options...
wkeil Posted May 20, 2006 Author Report Share Posted May 20, 2006 Get the wires to either the drivers or passenger side kick panel and run them under the door sill (plastic piece that you pull up) all the way to the rear. It's pretty simple actually. I just had to install an optical cable from my head unit to my amp and that is just what I did. BTW: Make sure you install the PAC piece behind the radio and not in the console. <{POST_SNAPBACK}> Thanks for the info man. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.