jon1178 Posted August 5, 2006 Report Share Posted August 5, 2006 i just bought my fuel pressure gauge and air/fuel meter install looks to be fairly straight forward. the question that i have is more about the air/fuel guage this gauge does not come with a lot of wire only a couple feet anyone that is using this gauge did you have to piece together more wire to do the install?? and for the gauges did you just tape into fuses in the fuse box for your power?? if you have any pics of the setup that would be great. thanks, jon Quote Link to comment Share on other sites More sharing options...
jon1178 Posted August 5, 2006 Author Report Share Posted August 5, 2006 ok well i have come to the conclusion from doing a little searching that i am not going to be able to finish the install on my fuel pressure gauge today because i will need to order some fitting to make it work. so does anyone have the part # for the fittings needed i could not find part #'s in any of the old post about this. now on to the air/fuel ratio guage. ok only a couple wires here great!! it says to tap into the O2 wire going into the pcm?? anybody remember which wire that is? color and location??? Quote Link to comment Share on other sites More sharing options...
BenKey Posted August 6, 2006 Report Share Posted August 6, 2006 Go to ANplumbing.com - there you should be able to find what you need. The fitting size is 1/8th NPT that you need. Personally, I would return that A/F guage. They are not worth the money for the accuracy they have. Quote Link to comment Share on other sites More sharing options...
jon1178 Posted August 6, 2006 Author Report Share Posted August 6, 2006 Go to ANplumbing.com - there you should be able to find what you need. The fitting size is 1/8th NPT that you need. Personally, I would return that A/F guage. They are not worth the money for the accuracy they have. <{POST_SNAPBACK}> since i am n/a at this time and do not need a boost gauge what other gauge would you recommend?? i have a 3 gauge pillar pod was and the 3 guages i have right now are fuel pressure, a/f ratio, interceptor gauges. Quote Link to comment Share on other sites More sharing options...
BenKey Posted August 8, 2006 Report Share Posted August 8, 2006 Not saying that an AFR gauge is a bad choice, but the ones that are tapping into your stock O2s are not worth much. Get one that uses a wideband sensor - like a LC-1 by innovative motorsports. Or, if that were a little pricey for you, I'd go with a 2nd interceptor gauge and watch more things at once. Quote Link to comment Share on other sites More sharing options...
jon1178 Posted August 8, 2006 Author Report Share Posted August 8, 2006 i think that will be going with a 2nd interceptor gauge just need to see if i can get it with the ss logo on the boot up screen. Quote Link to comment Share on other sites More sharing options...
BenKey Posted August 8, 2006 Report Share Posted August 8, 2006 i think that will be going with a 2nd interceptor gauge just need to see if i can get it with the ss logo on the boot up screen. <{POST_SNAPBACK}> Just make sure you have what you need to hook both into one connection (ALDL connector). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.