Jump to content

earl's fittings help


jon1178

Recommended Posts

i just finished installing my fuel pressure gauge using some ear'ls fitting. parts used were the -4 AN female to 1/8in. NPT on the schrader valve. and a 1/8 in. NPT to 1/8 in. NPT female coupler to attach the sending unit. i used teflon tape on the sending unit to seal the threads. should i also have used the teflon tape on the fitting also because i have a very slight leak under throttle but does not seem to leak when just idling.

 

P8100002.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...