Jump to content

FS: Rockford Fosgate Amps


03ScreaminSS

Recommended Posts

I bought this about a year and half ago, used it for 4 months - and has been sitting ever since. It works great, looks great, nothing at all wrong with it. It just wont work with my new system. It's the 04 model with the chrome on it. I paid $400 for it and will sell it for $300 +shipping.

 

 

Rockford Fosgate P600.1bd

Number of Channels 1

Rated Power 325 W x 1 @ 4 Ohms RMS

600 W x 1 @ 2 Ohms RMS

Total Power 600 Watts

Bridgeable No

Crossover Controls Low-Pass (LP): 35-250Hz 12dB/octave Butterworth

Infrasonic Filter: on/off selectable, 12dB/octave, -3dB @ 28Hz

Tone Controls Bass: 0dB to +18dB @ 45Hz

Signal Input Low level: 1 RCA pair

Signal Output Low level: 1 RCA pair

Power Input Connector Block

Power Wire Gauge 4 AWG

Speaker Output Connector Screw terminal barrier strip

Speaker Wire Gauge 8 AWG to 18 AWG

Heat Sink Type Cast aluminum

Cooling Convection

Remote Controls Punch Bass EQ (included with cable)

Visual Indicators Power On

Signal Level

Thermal Status

Speaker Protection

Circuit Topology Class Class BD

Frequency Response 20Hz to 20kHz +/- 0.5 dB

Dimensions 2.1 x 11 x 13.7 (in)

5.3 x 27.9 x 34.8 (cm)

 

 

I also have a P3002 sitting around. It is about 2 years old, used for about 6 months. It was in the Silverado SS and when it was traded in, it just sits around now. It also works great, looks great, and there isn't a thing wrong with it. It is missing the wire for the bass booster, but I seen that on ebay for like $20 shipped. I gave $300 for this back in the day, but I'll let it go for $150+ shipping.

 

Rockford Fosgate P3002

Number of Channels 2

Rated Power 75 W x 2 @ 4 Ohms RMS

150 W x 2 @ 2 Ohms RMS

300 W x 1 @ 4 Ohms bridged RMS

Total Power 300 Watts

Bridgeable Yes

Crossover Controls High-Pass (HP): 40-400Hz 12dB/octave Butterworth

Low-Pass (LP): 40-400Hz 12dB/octave Butterworth

Tone Controls Bass: 0dB to +18dB @ 45Hz

Signal Input Low level: 1 RCA pair

Signal Output Low level: 1 RCA pair

Power Input Connector Block

Power Wire Gauge 4 AWG

Speaker Output Connector Screw terminal barrier strip

Speaker Wire Gauge 8 AWG to 18 AWG

Heat Sink Type Cast aluminum

Cooling Convection

Remote Controls Punch Bass EQ (included with cable)

Visual Indicators Power On

Signal Level

Thermal Status

Speaker Protection

Circuit Topology Class Class A/B

Frequency Response 20Hz to 20kHz +/- 0.5 dB

Dimensions 2.4 x 11 x 11.7 (in)

6.1 x 27.9 x 29.7 (cm)

 

Get ahold of me for info. I don't have pics, because I don't have a digi camera.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...