wsaraceni Posted September 1, 2006 Report Share Posted September 1, 2006 When i measured before the rear was 1" higher than the front. Now after the rear is 1" lower than the front. How can i get the fronts to level out or lower? actually in the front i got a 2 in drop on the driver side and a 1.5 in drop on the passenger side Link to comment Share on other sites More sharing options...
kaotik1 Posted September 1, 2006 Report Share Posted September 1, 2006 Add a small shim block to the rear, or drop the torsion bars in the front. Link to comment Share on other sites More sharing options...
wsaraceni Posted September 1, 2006 Author Report Share Posted September 1, 2006 thanks. just what i wanted to know. what would be the advantages/disadvantages to both? Link to comment Share on other sites More sharing options...
kaotik1 Posted September 1, 2006 Report Share Posted September 1, 2006 If you drop the torsion bars, you may get a "BOUNCY" feeling. Getting blocks for the rear you will still have a stock feeling. Link to comment Share on other sites More sharing options...
wsaraceni Posted September 2, 2006 Author Report Share Posted September 2, 2006 thanks. where can i get blocks for the rear? seems like the way to go. is there any other way to lower the front reliably and safely Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.