HOD954 Posted April 26, 2007 Report Share Posted April 26, 2007 Is that a good price on the obx and are they a good header to use? if so i might have to jump on that deal!! Link to comment Share on other sites More sharing options...
RacerJJ Posted April 26, 2007 Report Share Posted April 26, 2007 I've got those headers and I think they are fine. I haven't had any problems with them at all. If you gut/remove the cat's, do you still need long tubes for the real power? Link to comment Share on other sites More sharing options...
HOD954 Posted April 26, 2007 Report Share Posted April 26, 2007 did you have to fight to get them on like one of the earlier posts said? Link to comment Share on other sites More sharing options...
Black2003SS Posted April 26, 2007 Report Share Posted April 26, 2007 He has the edelbrock shorties...he wasnt talking about OBX. He is in Cali and OBX/dynatechs are not 50state legal. Link to comment Share on other sites More sharing options...
PatrickSilverado Posted May 4, 2007 Report Share Posted May 4, 2007 Ok im gonna go ahead and ask all my questions about headers b/c i really want them. Ok i have realized that shorties are almost not worth it. So with long tube headers what exactly do you have to do? i went and looked at my factory set up and theres gonna have to be cuttin and welding for anything longer than shorties (i don't like cutting and welding). then i would have to get some O2 simulators, can i use stock cats? or run no cats at all, but then i would have to put my muffler back on to keep from running loud straight pipes (adding more expense). And as far as tuning, am i loosing out by not getting a tune for my headers or do you just get the tune to correct the O2 sensors? Well im sure i'll think of more questions after i post this. Link to comment Share on other sites More sharing options...
Badkarma Posted May 4, 2007 Report Share Posted May 4, 2007 I really wish there were smog legal full length headers in my commi state. I dont want to worrie about the smog nazis Link to comment Share on other sites More sharing options...
12'SROCK Posted May 4, 2007 Report Share Posted May 4, 2007 I've got those headers and I think they are fine. I haven't had any problems with them at all. If you gut/remove the cat's, do you still need long tubes for the real power? yes sir. the real purpose of the long tubes is to scavange the exhaust gases from each cylinder the same to improve your engines VE(volumetric efficientcy). so you need the same length tube for each exahust port to do so which also creates a vaccum effect to help suck out the exhaust gases. so the faster you get the exhaust gases out the faster you can recharge your cylinders with fresh air which =power Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.