Bluewheelz Posted September 14, 2006 Report Share Posted September 14, 2006 While pulling a wire through the rubber grommet in the firewall (the one with all of the wires going through) I apparently shorted out a yellow wire to ground. The truck was turned off at the time and I figured it just popped a fuse. The following now do not work... Cluster lights Emergency Lights Blinkers Driver Power Window I checked all of the fuses, they all seem to look ok (driver side dash and big box under hood on driver side) I thought maybe a PCM reset was needed, so I took loose the ground for over an hour and just hooked it back up...No luck Anybody have some idea where else and what else I can check?? I am losing hope here..... Link to comment Share on other sites More sharing options...
edessa Posted September 15, 2006 Report Share Posted September 15, 2006 The best thing to do is find out where that yellow wire goes and what it controls. Then go from there. Link to comment Share on other sites More sharing options...
Bluewheelz Posted September 15, 2006 Author Report Share Posted September 15, 2006 Turns out it was a 50a fuse under the hood. The fuse didn't look blown through the window on the top, but I checked it with my meter and it was blown on the side!?? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.