tawss04 Posted January 6, 2007 Report Share Posted January 6, 2007 Horsepower just for fun Quote Link to comment Share on other sites More sharing options...
montanass Posted January 6, 2007 Report Share Posted January 6, 2007 that's kinda neat... it says I'm making around 337 @ the wheels... time for a supercharger Quote Link to comment Share on other sites More sharing options...
04CHASE Posted January 6, 2007 Report Share Posted January 6, 2007 those are very inacurate but it says im making 633 to the wheels and 747 at the crank. i did a calaculator last night, with 60lb injectors (@ 43.5 psi) thats almost 70 lbs at 58 psi, and i took them to 98 idc with a 12.0 afr and 12 lbs of boost it said im making close to 800 hp. i will find out for sure soon , hopefully next week when i hit the dyno. ill be happy with anything over 6 at the wheels. Quote Link to comment Share on other sites More sharing options...
montanass Posted January 6, 2007 Report Share Posted January 6, 2007 ill be happy with anything over 6 at the wheels. <{POST_SNAPBACK}> Not asking for much are ya this is all on a "stock" motor (block) right? Quote Link to comment Share on other sites More sharing options...
PladdPezzPunk Posted January 6, 2007 Report Share Posted January 6, 2007 thats cool Quote Link to comment Share on other sites More sharing options...
04CHASE Posted January 7, 2007 Report Share Posted January 7, 2007 ill be happy with anything over 6 at the wheels. <{POST_SNAPBACK}> Not asking for much are ya this is all on a "stock" motor (block) right? <{POST_SNAPBACK}> yes sir!! all stock bottom end. im thinking im putting at its max level right now. im trying to get this new engine started but i have been procrastinating. ive got about half of it but i need the roating assembly. should have it together by summer. Quote Link to comment Share on other sites More sharing options...
misterp Posted January 7, 2007 Report Share Posted January 7, 2007 ill be happy with anything over 6 at the wheels.Not asking for much are ya this is all on a "stock" motor (block) right?yes sir!! all stock bottom end. im thinking im putting at its max level right now. im trying to get this new engine started but i have been procrastinating. ive got about half of it but i need the roating assembly. should have it together by summer.Dude you're going to pound the top ring lands right out of those pistons! Mr. P. Quote Link to comment Share on other sites More sharing options...
04CHASE Posted January 7, 2007 Report Share Posted January 7, 2007 ill be happy with anything over 6 at the wheels.Not asking for much are ya this is all on a "stock" motor (block) right?yes sir!! all stock bottom end. im thinking im putting at its max level right now. im trying to get this new engine started but i have been procrastinating. ive got about half of it but i need the roating assembly. should have it together by summer.Dude you're going to pound the top ring lands right out of those pistons! Mr. P. <{POST_SNAPBACK}> im assuming somethign will happne eventually , the motor is not even 5k miles old , i think it right around 3500 miles old now. if it lasts to 10k ill be happy. im going to spray it so it may go poo on me. Quote Link to comment Share on other sites More sharing options...
PladdPezzPunk Posted January 7, 2007 Report Share Posted January 7, 2007 good luck there. i'm curious to see how much abuse the factory bottom end will take. Quote Link to comment Share on other sites More sharing options...
thomp62301 Posted January 7, 2007 Report Share Posted January 7, 2007 it says im making 514 at the wheels and 607 at the flywheel. them numbers seem alittle far fetched to me. even though i would love it if it was that high Quote Link to comment Share on other sites More sharing options...
Jond983 Posted January 8, 2007 Report Share Posted January 8, 2007 300 @ the wheels and 365 @ the fly? no way Quote Link to comment Share on other sites More sharing options...
06redSSrwd Posted January 9, 2007 Report Share Posted January 9, 2007 pretty interesting i'm going to give it a try when i have time to get all the proper info. how accurate do you think it is? ES Quote Link to comment Share on other sites More sharing options...
04CHASE Posted January 9, 2007 Report Share Posted January 9, 2007 pretty interesting i'm going to give it a try when i have time to get all the proper info.how accurate do you think it is? ES <{POST_SNAPBACK}> NOT VERY Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.