Jump to content

FS: Baer 6 piston (6S kit) and Baer disc conversion rears


—Bauker™—

Recommended Posts

-Fronts are 6S calipers (RED) with the largest rotor possible (drilled and slotted and zinc coated), I believe they're 15" but Ill have to check. Used for about 15,000 miles. Still have about 75% life left on the pad.

 

The rear kit (RED), is a drum to disc conversion kit for the '06 (not sure what other years this will work for, call baer if you would like to know), has never been installed, perfect condition. I just never had time to install them. The rotors are cross drilled/ slotted/ zinc coated as well, and the largest avalible.

 

Ill pay s/h and Ill throw in new front pads (220.00) incase there are those of you who think the old one's are "too used".

 

Only reason I'm selling them is because I finally decided what car I'm buying and it's time to part out my truck.

 

PM me if you're interested. First person I can make a deal with, gets them. I will leave a PENDING and SOLD post when the deal final.

Edited by —Bauker™— (see edit history)
Link to comment
Share on other sites

Anyone out there desiring just the rear conversion want to go partners with me on this purchase? I am interested in the fronts but have no need for the rears (I already have rear disc brakes), this could work out well for someone that wants to upgrade the rear drums on their 2WD SS/VHO. I spoke quickly with —Bauker™— he told me in his reply that he ideally wants to sell the entire package together (I totally understand) but I'd be willing to go in partners with someone that wanted just the rear kit to make this deal a win/win for everybody - please PM me if interested.

 

Mr. P.

Edited by misterp (see edit history)
Link to comment
Share on other sites

Anyone out there desiring just the rear conversion want to go partners with me on this purchase? I am interested in the fronts but have no need for the rears (I already have rear disc brakes), this could work out well for someone that wants to upgrade the rear drums on their 2WD SS/VHO. I spoke quickly with —Bauker™— he told me in his reply that he ideally wants to sell the entire package together (I totally understand) but I'd be willing to go in partners with someone that wanted just the rear kit to make this deal a win/win for everybody - please PM me if interested.

 

Mr. P.

 

PM sent

Link to comment
Share on other sites

I will pay shipping for both if the kit does infact get split up.

 

replacing the rear set up ..is that an expensive install? Is this a complete rear brake replacement? I am green to all this tech. stuff..thanks

 

no. its not too bad. start by taking the stock drums off(maybe 15 mins a side), then take the axle shafts out, replace backing plates, install axle shafts. slide rotor on, bolt caliper on. done. then bleed :driving:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...