HOD954 Posted February 18, 2007 Report Posted February 18, 2007 Well i've upgraded all my ground wires except the block to frame.i figured i would wait till it got alittle warmer.Well today is it but im having trouble finding the stock wire or even making a new one someone help what did youguys doing the big three use for a spot help thanks
fast4popper Posted February 18, 2007 Report Posted February 18, 2007 Well i've upgraded all my ground wires except the block to frame.i figured i would wait till it got alittle warmer.Well today is it but im having trouble finding the stock wire or even making a new one someone help what did youguys doing the big three use for a spot help thanks leave the stock one alone. just run another one. I used the bolt out of my alternator bracket. nice solid easy to get to 15mm bolt.
Meegs Posted March 10, 2007 Report Posted March 10, 2007 I just did a phot How-To on the intermediate steering shaft. I'll snap some pics of my grounding situation. Pretty self explanitory if you look hard. I unbolted where the engin block heater was, scraped the "Wax" or WhatTheHell off and ended run with a copper terminal, bolted back the holder for the engin block heater. I also grounded the motor where it says GND. I'm sorry I just broke my glasses trying to get these pics. Can't quite see what I am doing at this current moment. There see the bolt location....kinda near the coolan hose, but down on the frame ? Red 2 guage for a ground wire..........Flippin' ROOKIE. I bet the truck catches fire and burns to the ground just cuz of color! and Let-R-Buck
Recommended Posts
Archived
This topic is now archived and is closed to further replies.