RacerJJ Posted February 27, 2007 Report Share Posted February 27, 2007 Anyone know the proper pushrod length I will need if I am adding a Comp 236/238 .601/.605 113 cam with Patriot Dual springs and Comp lifters? Quote Link to comment Share on other sites More sharing options...
12'SROCK Posted March 1, 2007 Report Share Posted March 1, 2007 I belive that you can use your stock push rods. I think Trick Flow heads are the only ones that require push rod change because of the valve angle difference. Oh, if you are upgrading your rockers to full roller, you will need harded push rods and guid plates. Quote Link to comment Share on other sites More sharing options...
04CHASE Posted March 1, 2007 Report Share Posted March 1, 2007 the preload on the comp lifter isnt much. you will need a to check your needed legnth for the rods. this is also the thing i am waiting on ordering , my builder doesent know what legnth i will need since i went with new everything. i do have a set of hardedn comp 7.4's if i dont neeed them ill give you a great deal on them if your not in a big hurry. Quote Link to comment Share on other sites More sharing options...
RacerJJ Posted March 1, 2007 Author Report Share Posted March 1, 2007 the preload on the comp lifter isnt much. you will need a to check your needed legnth for the rods. this is also the thing i am waiting on ordering , my builder doesent know what legnth i will need since i went with new everything. i do have a set of hardedn comp 7.4's if i dont neeed them ill give you a great deal on them if your not in a big hurry. Thanks Chase. I'm in no hurry at all...this stuff won't be installed until after the racing season (December). I'll call Comp and ask around and see what length I'll need for my set-up. Thanks again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.