yttaf Posted July 25, 2007 Report Share Posted July 25, 2007 I need to find some stock SS emblems for my truck. The previous owner took them off, & i'm having a hard time trying to find some. I need both driver & passenger door emblems & tailgate emblem Quote Link to comment Share on other sites More sharing options...
yorgog Posted July 29, 2007 Report Share Posted July 29, 2007 I need to find some stock SS emblems for my truck. The previous owner took them off, & i'm having a hard time trying to find some. I need both driver & passenger door emblems & tailgate emblem I have them. PM me with an offer Quote Link to comment Share on other sites More sharing options...
zippy Posted July 31, 2007 Report Share Posted July 31, 2007 I have one set also, will sell them at dealer cost. Quote Link to comment Share on other sites More sharing options...
yttaf Posted August 6, 2007 Author Report Share Posted August 6, 2007 I have one set also, will sell them at dealer cost. Thanx, I have a set coming from yorgog. Should be here soon I hope. I can't wait to get them on... Quote Link to comment Share on other sites More sharing options...
yttaf Posted August 8, 2007 Author Report Share Posted August 8, 2007 Thanx yorgog!!! Got the emblems today & can't wait to put them on. Does anyone know how far back these SS emblems are supposed to be from the front of the door? Or does anyone have the measurements as to where the stock location for these are? Quote Link to comment Share on other sites More sharing options...
The Breeze Posted August 12, 2007 Report Share Posted August 12, 2007 I have one set also, will sell them at dealer cost. Zippy Im intrested in a set of SS emblems how much + shipping to 21784. Thak you, Bryan Quote Link to comment Share on other sites More sharing options...
Rays B4U Posted August 12, 2007 Report Share Posted August 12, 2007 Thanx yorgog!!! Got the emblems today & can't wait to put them on. Does anyone know how far back these SS emblems are supposed to be from the front of the door? Or does anyone have the measurements as to where the stock location for these are? Emblem/Nameplate Replacement - Door SS 1. If the location of the emblem/nameplate has not been marked apply tape. 2. Use the following dimensions in order to mark the proper position of the emblem/nameplate on the door. 105 mm (4.1 in) (A) From the vertical edge 22 mm (0.9 in) (B) From the horizontal edge 3. Warm the door surface with a heat gun J 25070 152 mm (6.0 in) from the surface to a minimum of 21°C (70°F). 4. Apply tape over the outer surface of the emblem/nameplate to ensure alignment. Important Do not touch the adhesive backing of the emblem/nameplate. 5. Remove the backing from the front end of the emblem/nameplate. 6. Press the emblem/nameplate to the door panel surface while continuing to remove the backing. 7. Hand roll the emblem/nameplate to the door panel to ensure proper adhesion. 8. Inspect the emblem/nameplate for bonding. 9. Remove the tape from the emblem/nameplate and the area around the door emblem/nameplate. Emblem/Nameplate Replacement - Endgate SS 1. If the location of the emblem/nameplate has not been marked apply tape. 2. Use the following dimensions in order to mark the proper position of the emblem/nameplate on the end gate. 55 mm (2.2 in) (A) From the vertical edge 43 mm (1.7 in) (B) From the horizontal edge 3. Warm the end gate surface with a heat gun J 25070 152 mm (6.0 in) from the surface to a minimum of 21°C (70°F). 4. Apply tape over the outer surface of the emblem/nameplate to ensure alignment. Important Do not touch the adhesive backing of the emblem/nameplate. 5. Remove the backing from the front end of the emblem/nameplate. 6. Press the emblem/nameplate to the end gate panel surface while continuing to remove the backing. 7. Hand roll the emblem/nameplate to the end gate panel to ensure proper adhesion. 8. Inspect the emblem/nameplate for bonding. 9. Remove the tape from the emblem/nameplate and the area around the end gate emblem/nameplate. Quote Link to comment Share on other sites More sharing options...
yttaf Posted August 12, 2007 Author Report Share Posted August 12, 2007 hey sweet thanks alot!!! I just guessed today after checking out the trucks from our local meet & I got it pretty close, but that info helps a ton. THANKS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.