ivin74 Posted November 1, 2007 Report Share Posted November 1, 2007 Has any one replaced their mass air flow sensor with an ohm resistor.? do you get any power gains? Quote Link to comment Share on other sites More sharing options...
SS_bnoon_SS Posted November 1, 2007 Report Share Posted November 1, 2007 Crazy ricer mod to trick the PCM into thinking it's colder outside, which adds more timing. Not worth a poo. Quote Link to comment Share on other sites More sharing options...
.justin. Posted November 1, 2007 Report Share Posted November 1, 2007 (edited) Absolutely do not do that. You will have no gains and likely trip the SES light and default into Speed density. This will leave you with less power, as you'll be stuck on the low octane timing table. If the light does not trip, you will almost surely damage your engine. Crazy ricer mod to trick the PCM into thinking it's colder outside, which adds more timing. Not worth a poo.He said mass air sensor, not IAT... Edited November 1, 2007 by .justin. (see edit history) Quote Link to comment Share on other sites More sharing options...
SS_bnoon_SS Posted November 1, 2007 Report Share Posted November 1, 2007 (edited) He said mass air sensor, not IAT... oops Edited November 1, 2007 by SS_bnoon_SS (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.