slowmofo Posted November 30, 2007 Report Posted November 30, 2007 (edited) as stated 04pcm tuned by zippy for cai and exuast. 75shipped let me know. sorry it's for a silverado SS Edited November 30, 2007 by slowmofo (see edit history) Quote
Ross Posted November 30, 2007 Report Posted November 30, 2007 (edited) How does this work with a pcm from another vehicle? I'll take it if I can just throw it in without any issues. Edited November 30, 2007 by Ross (see edit history) Quote
Rausche Posted November 30, 2007 Report Posted November 30, 2007 If it will work for an '03 I've got DIBS!!! Quote
slowmofo Posted November 30, 2007 Author Report Posted November 30, 2007 I got it on here and it worked on my 03 sss but the gas gauge would read backwards! you will need to do a key relearn to make it work. Quote
Supercharged06SS Posted November 30, 2007 Report Posted November 30, 2007 its going to need a crank relearn no matter what it goes into. They can be done in seconds by any dealership. Quote
Erwin8r Posted November 30, 2007 Report Posted November 30, 2007 its going to need a crank relearn no matter what it goes into. They can be done in seconds by any dealership. Why would it need a crank re-learn? I thought the PCM's were plug 'n play, provided they were "mapped" for your particular mods? Quote
slowmofo Posted December 1, 2007 Author Report Posted December 1, 2007 When i put it in my truck it did not need a crank relearn, it did need a key relearn. Quote
Erwin8r Posted December 3, 2007 Report Posted December 3, 2007 When i put it in my truck it did not need a crank relearn, it did need a key relearn. Okay, what's a key relearn? I just got my wait4me PCM in... Also, will the truck run bad until the crank relearn is done? TIA!!! Quote
brobradh77 Posted December 3, 2007 Report Posted December 3, 2007 key relearn is usually a procedure you have to do one time for your truck to learn a new PCm sorta speak. You try to start it and leave the key in the on position for like 30 sec. and repeat 3 times and on 4th try your truck should fire up. Quote
Erwin8r Posted December 4, 2007 Report Posted December 4, 2007 key relearn is usually a procedure you have to do one time for your truck to learn a new PCm sorta speak. You try to start it and leave the key in the on position for like 30 sec. and repeat 3 times and on 4th try your truck should fire up. Okay, I found this in the archives: "ATTENTION: Your vehicle may not start unless this procedure is performed. GM introduced an anti-theft system in 1996 and newer vehicles. In order for your vehicle to start, you must perform the passkey relearn procedure. If your vehicle’s battery is low, it is recommended a battery charger be hooked up at this time. This Procedure will take approximately 20-30 minutes. After your PCM is installed, please perform the following. You may want to be outside your vehicle so shut the door, roll down the window. PROCEDURE: Insert key, attempt to start the vehicle and leave the key in the ON position. In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins. When the Security light goes OFF, turn the ignition to the OFF position. Leave ignition OFF for 20 Seconds. Attempt to start the vehicle again and leave the key in the ON position. In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins. Turn the ignition to the OFF position for 20 Seconds. Attempt to start the vehicle again and leave the key in the ON position. In some vehicles, the Battery and Security light will blink for several seconds, and then shut off. Then the Security light will then remain ON. Leave the ignition ON until the Security light goes OFF. This will take more than 5 mins. Once this entire procedure has been completed (three times) your vehicle will start on the fourth attempt. Note: Some vehicles perform the relearn in a different sequence. You may notice your security light, battery light and abs light will alternate. Once the security light is left out of the sequence that is considered one step. Repeat the procedure two more times and on the fourth time your vehicle will start. FAQs: - The procedure was just completed now my car is making a clicking noise when I attempt to start it. Your battery may have become too weak to crank the engine over. - I performed the procedure and my vehicle still doesn’t start Please repeat the procedure again. 210-626-0278 " Quote
Prestoar Posted December 4, 2007 Report Posted December 4, 2007 Local Chevy dealership did my crank relearn for about 15 bucks and took about 15 mins Quote
kevinh Posted December 4, 2007 Report Posted December 4, 2007 as stated 04pcm tuned by zippy for cai and exuast.75shipped let me know. sorry it's for a silverado SS Is this still for sale? If so, do you take paypal? Thanks. Quote
Silverado6.0 Posted December 5, 2007 Report Posted December 5, 2007 I cant believe that this is not already gone, A Zippy tune is a killer tune, and that is dirt ass cheap for just the pcm, let alone the tune too! Bump for ya for a great price on a great part! Quote
slowmofo Posted December 5, 2007 Author Report Posted December 5, 2007 Yes i still have it. I do have someone thats gonna pay tonight though so i will let you know. Quote
JetSet96 Posted December 10, 2007 Report Posted December 10, 2007 Is this sold yet?? If it is not, I will buy it, and pay you ASAP!!! Thanks, Steve Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.