gixxerrider Posted December 7, 2007 Report Share Posted December 7, 2007 Would this work? it is a bit pricey. ShurTrax Traction Weight http://www.autoanything.com/hitch-bed-acce...5A2868A0A0.aspx Quote Link to comment Share on other sites More sharing options...
misterp Posted December 7, 2007 Report Share Posted December 7, 2007 (edited) Yup you'd be surprised what a few hundred pounds will do for traction. Remember to have a full tank of gas too, the difference between full and empty is 100+ lbs. We would always throw a few bales of hay in the back of our truck beds. Gotta have good tires too, the factory Goodyears are so bad in the wet they are dangerous. Mr. P. Edited December 7, 2007 by Mr. P. (see edit history) Quote Link to comment Share on other sites More sharing options...
gixxerrider Posted December 7, 2007 Author Report Share Posted December 7, 2007 Gotta have good tires too, the factory Goodyears are so bad in the wet they are dangerous. Mr. P. This is so true. I spin now when the ground is wet. Quote Link to comment Share on other sites More sharing options...
smoke03 Posted December 7, 2007 Report Share Posted December 7, 2007 This is so true. I spin now when the ground is wet. me too...my fiance uses 2 bags of landscaping gravel in the bed of her ford ranger.... Quote Link to comment Share on other sites More sharing options...
Tyler's Touch Posted December 7, 2007 Report Share Posted December 7, 2007 I need to add weight to mine...mines like driving a one wheel drive go kart until the posi kicks in...but waaaayyy fun when theres no snow too Quote Link to comment Share on other sites More sharing options...
03blueSSon22s Posted December 7, 2007 Report Share Posted December 7, 2007 I think its pretty sweet but I wouldnt spend that much money for it, that and when or if the water freezes your not going to be able to take it out if you need to. Your better off getting sand or salt or something in that you can take out easy, that and being alot cheaper. Quote Link to comment Share on other sites More sharing options...
BOB47 Posted December 7, 2007 Report Share Posted December 7, 2007 Try one of these. Lots of traction. Quote Link to comment Share on other sites More sharing options...
Vortec MAX Posted December 7, 2007 Report Share Posted December 7, 2007 I have two old tires that I put wood slats in the bottom of one side and filled them with concrete. They way between 250 to 300 pounds each and are a real PITA to get in the bed. I use a motorcycle ramp on the curb and "roll" it up the ramp. It is still a pretty good workout. The rubber makes them not slide around, but I imagine if you ever had to hit the brakes hard it wouldn't be too good for the back of the cab. I actually made those tires when I drove an '83 Chevy 4X4 with a long bed. It was all restored, but it did not get ANY traction with the open rear diff unless it was in 4X4. The new truck actually had a pretty decent weight distribution, putting more weight on the rear wheels. Plus I have the locking rear diff. If anyone wants the tires, you can have them for free, but you have to pay shipping LOL I am going to throw them out, but they are so damn heavy the task hasn't seemed very appealing. Mike Quote Link to comment Share on other sites More sharing options...
zanis520 Posted December 7, 2007 Report Share Posted December 7, 2007 Try one of these. Lots of traction. but our beds are only 6 feet long. Dave (usabodyguard) is 6'8, i dont think he would fit Quote Link to comment Share on other sites More sharing options...
thallent Posted December 7, 2007 Report Share Posted December 7, 2007 I used to have a frame of 2x4's across the bed. One in front and behind of the fenders and attached to each other up against the fenders. I would then put in 4 bags of quickrete sand. Always stayed right over the axle. Quote Link to comment Share on other sites More sharing options...
Quik Posted December 7, 2007 Report Share Posted December 7, 2007 whatever you use for weight make sure it cant be a projectial. anything that isnt secure can go thru your back window or cab if loose. Quote Link to comment Share on other sites More sharing options...
montanass Posted December 7, 2007 Report Share Posted December 7, 2007 AWD works for me... Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted December 7, 2007 Report Share Posted December 7, 2007 Get the Shur-Trax system, definitely worth the money. No projectiles to bang your bed up, its low profile like 3-4 inches tall, its freezable, and you can put up to 500lbs on top of it. I have it and I had 0 traction problems with a RWD truck last winter, and we had some bad snow/ice storms last year. The only down side is that with the 400lbs of weight in the bed, I lost 1mpg and the truck rode a little more rough than usual(the back of the truck came down 2 inches or so with the added weight), but its worth it to travel safely in winter weather. Quote Link to comment Share on other sites More sharing options...
Hankg42 Posted December 7, 2007 Report Share Posted December 7, 2007 (edited) When I had a compact truck, I used 3 railroad ties, cut to the width of the bed, with 2 metal straps across the top, screwed into each tie, to hold them together. They were positioned to the rear of the wheel wells, which held the whole thing in place. It worked well for me, and didn't cost very much. Edited December 7, 2007 by Hankg42 (see edit history) Quote Link to comment Share on other sites More sharing options...
packjh Posted December 7, 2007 Report Share Posted December 7, 2007 if you were awd id tell you to save money.... alot of people in alaska use sandbags... or if you have an old cooler fill it full of water let it freeze thats an easy way to gain weight if it stays cold there long enough... just use ur head and think what will add weight that i dont care about?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.