Jump to content

Quick Shock ?


packjh

Recommended Posts

should have to bounce my bed to get the shock to line up...?? i know one of the belltech shocks i have is 3 inches to short and the other one is like half inch and a lil bounce the bolt pops right in. Should i retrun both or just the really really short one...

Link to comment
Share on other sites

should have to bounce my bed to get the shock to line up...?? i know one of the belltech shocks i have is 3 inches to short and the other one is like half inch and a lil bounce the bolt pops right in. Should i retrun both or just the really really short one...

What part numbers do you have?

Link to comment
Share on other sites

#4920 is the soft foam bump stop kit. With a 2" drop the factory bumps will probably work fine. Just try the factory ones and change out if you need to. The 4920's are pretty soft so when you do bottom out it's a soft squish in the back instead of a thud or hard bang with urethane bumps.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...