packjh Posted January 29, 2008 Report Share Posted January 29, 2008 I was wandering if you guys knew how to turn off the rear o2 sensors thru hptuners??? I have simulators but just changed headers and have not read my codes to see what all its throwing... I want to figure out how to do this just incase the simulators are not working properly Quote Link to comment Share on other sites More sharing options...
thomp62301 Posted January 30, 2008 Report Share Posted January 30, 2008 (edited) im not anywhere near my laptop to double check this but i think you click on engine diag, DTC's and uncheck po137, 138, 140, 141 for bank 1 and po157, 158, 160, 161 for bank 2. anybody please correct me if i'm wrong. Edited January 30, 2008 by thomp62301 (see edit history) Quote Link to comment Share on other sites More sharing options...
BLK04SS Posted January 30, 2008 Report Share Posted January 30, 2008 I was wandering if you guys knew how to turn off the rear o2 sensors thru hptuners??? I have simulators but just changed headers and have not read my codes to see what all its throwing... I want to figure out how to do this just incase the simulators are not working properly what do u have for simulators, i need a set for my truck, im going long tubes with no cats. and where did u get them, thanks a million dude. Quote Link to comment Share on other sites More sharing options...
thomp62301 Posted January 30, 2008 Report Share Posted January 30, 2008 what do u have for simulators, i need a set for my truck, im going long tubes with no cats. and where did u get them, thanks a million dude. http://www.casperselectronics.com/ Quote Link to comment Share on other sites More sharing options...
BLK04SS Posted January 30, 2008 Report Share Posted January 30, 2008 http://www.casperselectronics.com/ cant seem to find them on their website. Quote Link to comment Share on other sites More sharing options...
mean05 Posted January 30, 2008 Report Share Posted January 30, 2008 (edited) do not uncheck the check marks on the codes just go to the right of the check box where it has a 1.Mil error and double click on that and change it to 3. No error reported.....that way when you pull into the place to get inspected it will still pass the test.....just look for all the codes that had to do with sensor 2...on both bank 1 and bank 2 Edited January 30, 2008 by mean05 (see edit history) Quote Link to comment Share on other sites More sharing options...
packjh Posted January 30, 2008 Author Report Share Posted January 30, 2008 Thanx guys i bought simulators from speed inc.... they are for an fbody and i had to cut an extra groove into them to make them fit properlly seems that they dont work right but ill leave them in to keep nasty dirt and grim out of the connector. Im going to try moving it to 3 thanx for the help guys. Quote Link to comment Share on other sites More sharing options...
12'SROCK Posted January 30, 2008 Report Share Posted January 30, 2008 why didnt you just delete the codes in the PCM it would be better IMO. just my .02 Quote Link to comment Share on other sites More sharing options...
packjh Posted January 31, 2008 Author Report Share Posted January 31, 2008 Thanx mean05 fixed my engine light problems... Quote Link to comment Share on other sites More sharing options...
mean05 Posted January 31, 2008 Report Share Posted January 31, 2008 Thanx mean05 fixed my engine light problems... good deal and doing it that way it will also pass any state inspections if they plug into your PCM Quote Link to comment Share on other sites More sharing options...
1BAD2K Posted May 1, 2008 Report Share Posted May 1, 2008 do i need to get a tune for this? i just want to install some longtubes right now and wait on a full tune for a couple more months... Quote Link to comment Share on other sites More sharing options...
12'SROCK Posted May 1, 2008 Report Share Posted May 1, 2008 do i need to get a tune for this? i just want to install some longtubes right now and wait on a full tune for a couple more months... yes in order for it to run right and remove the SES light you would need it tuned Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.