mightbstock Posted February 28, 2008 Report Share Posted February 28, 2008 Im thinking about lowering my sierra Denali. How much can I drop it before the AWD binds/ or has any problems. I also use it to tow a lifted jeep to the trails. What should I be looking for? Quote Link to comment Share on other sites More sharing options...
Nevada79 Posted February 28, 2008 Report Share Posted February 28, 2008 (edited) This insert is from Mr. Ps' "Announcement of lowering notes and best practices". Good reading. You should check out the rest of the gathered material. Thanks Mr. P Dropping the front of the AWD SS more than 2-inches (by any method) risks causing CV-joint binding and hence front-end vibration which is felt under acceleration at specific vehicle speeds in the steering column and firewall, and will momentarily disappear as you travel over a bump in the highway - it was discovered that this is corrected by cranking the torsion bars back up a quarter-turn at a time until the binding/vibration is relieved Edited February 28, 2008 by Nevada79 (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.