Silverado6.0 Posted May 22, 2008 Report Share Posted May 22, 2008 (edited) Have a few things I am getting rid of and figured I would put them on here b4 I toss them on ebay. Here it is. All prices are plus shipping, let me know if I am to high, I need to move this stuff guys. Oil pan, and covers have been hot tanked and cleaned, perfect shape!!! All parts are from an 03 Silverado with 78k 04 avalanche trans 4l60e lost the 3-4 clutches, bone stock $400 Starter $40 Intake with fuel rails and injectors (No Egr) $75 Drive by wire throttle body-$50 Oil pan and windage tray/Pickup tube $60 Valley cover $25 Valley cover $25 Timing chain cover $25 Rear cover $25 Valve covers $40 Complete set of coil packs with brackets (will not seperate) $60 Lifter Cups/Holders $10 Rocker arm assembly, left and right. $25 Water Pump with tensioner and thermostat $40 Acc. Bracket with Power steering pump and hoses $50 (2005 silverado) Drive by wire gas pedal and tach module with wire- SOLD Street and Performance Ls Motor swap brackets, allows the use of Ls engine in any traditional small block motor mounts. New, Never used $75 Edited May 22, 2008 by Silverado6.0 (see edit history) Quote Link to comment Share on other sites More sharing options...
2006_superado Posted May 22, 2008 Report Share Posted May 22, 2008 so will those motor mounts allow me to install a LS engine in place of any gen-1 V8?.. if so will it bolt up to a th350/th400 or would i have to use the modern trans?. let me know a.s.a.p. thanks. Quote Link to comment Share on other sites More sharing options...
sprayed99 Posted May 22, 2008 Report Share Posted May 22, 2008 so will those motor mounts allow me to install a LS engine in place of any gen-1 V8?.. if so will it bolt up to a th350/th400 or would i have to use the modern trans?.let me know a.s.a.p. thanks. research the th400 swap....I do believe they are a direct bolt up Quote Link to comment Share on other sites More sharing options...
allballz57 Posted May 22, 2008 Report Share Posted May 22, 2008 so will those motor mounts allow me to install a LS engine in place of any gen-1 V8?.. if so will it bolt up to a th350/th400 or would i have to use the modern trans?.let me know a.s.a.p. thanks. It will bolt up but you will need a special converter,the hub is different.I have one I might be interested in selling.It is a vigilante 3400 stall,ment for an ls1 mated to an older non electronic trans. Quote Link to comment Share on other sites More sharing options...
Silverado6.0 Posted May 22, 2008 Author Report Share Posted May 22, 2008 That is correct, it will swap any ls motor in place of a standard gen 1 engine. They fit awesome too!! Quote Link to comment Share on other sites More sharing options...
gixxerrider Posted May 23, 2008 Report Share Posted May 23, 2008 where are you shipping from? trans a 4l60e 2wd? is the TB ported? Quote Link to comment Share on other sites More sharing options...
Silverado6.0 Posted May 23, 2008 Author Report Share Posted May 23, 2008 where are you shipping from? trans a 4l60e 2wd? is the TB ported? Im in Michigan, right by zippy actually. Its a 4wd trans, and a stock tb. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.