Pipefitters SS Posted June 2, 2008 Report Posted June 2, 2008 I had my Bser roll pan glassed in by our local GM dealer and its already cracked out 1 month The used all the special glue and crap. I went back to have them look at it and they said that there is nothing that they could do. Any sugestions. I will be spending the night sanding down the pan and geting all of there crap out of it Quote
Turbocoop Posted June 2, 2008 Report Posted June 2, 2008 Does your GM place have its own body shop on site? We always send ours out to a body shop. Thats BS they should fix it if its only been a month and its cracking. Lets see some pics Quote
Pipefitters SS Posted June 2, 2008 Author Report Posted June 2, 2008 Does your GM place have its own body shop on site? We always send ours out to a body shop. Thats BS they should fix it if its only been a month and its cracking. Lets see some pics They have there own. Too late already off and taking all of the bonding agent out of it. I have alreadt talked to them and The owner is now involved he said it was due to the mat that BSER uses. So I have talked to another shop close to home here and they said BS. I think that after I get it done I will take it to them. Quote
Big O Posted June 2, 2008 Report Posted June 2, 2008 That is bullshit ... BSER has been selling these for years on this site and in all weather climates ... it wasn't the roll pan ... it was the shop. Quote
Pipefitters SS Posted June 2, 2008 Author Report Posted June 2, 2008 That is bullshit ... BSER has been selling these for years on this site and in all weather climates ... it wasn't the roll pan ... it was the shop. I know this your preaching to the choir!!!!!!!!!!!!!!!!!!!!!!!!! Quote
Pipefitters SS Posted June 2, 2008 Author Report Posted June 2, 2008 was it filled? Yes it was. It was all smothed out you couldnt even tell where it met the side at. Quote
NTMD8R_SS Posted June 2, 2008 Report Posted June 2, 2008 That sucks dude, have another shop fix their f**k up. Quote
Pipefitters SS Posted June 2, 2008 Author Report Posted June 2, 2008 That sucks dude, have another shop fix their f**k up. They said they would do it for 500 and remove a couple minor little dents and touch the front bumper a small scuff. Quote
Pipefitters SS Posted June 2, 2008 Author Report Posted June 2, 2008 That sucks dude, have another shop fix their f**k up. Quote
04CHASE Posted June 2, 2008 Report Posted June 2, 2008 well i can tell you now that is why it cracked, the bed flex's alot and the bed sides are plastic and the roll pan is glass. those two are very hard to get to bond almost impossible. i know one guy who did it and it came out awesome and didnt crack but im sure it will one day. Quote
palletyard Posted June 3, 2008 Report Posted June 3, 2008 your truck should of been back to that shop and repaired agian at thier cost. but i know its to late but that was my .02 good luck with the other shop and post some pics when done Quote
r8rs4lf Posted June 3, 2008 Report Posted June 3, 2008 well i can tell you now that is why it cracked, the bed flex's alot and the bed sides are plastic and the roll pan is glass. those two are very hard to get to bond almost impossible. EXACTLY!!! The very reason why I never got it filled!!!! I contemplated it and even went around for a while to see who can do it, but something just told me that it will crack one day. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.