NashSS Posted August 15, 2008 Report Share Posted August 15, 2008 I'm thinking about buying some cowl induction emblems like alot of you guys here have but I'm new to installing stuff like this how do you guys get them lined up and even on both sides? I don't want to buy them and try to put them on then screw em up like I did my silveradoss.com sticker. I put 2 of them on and my left one is mis aligned and is angled and I don't want to screw these up. Lemme know guys. Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted August 15, 2008 Report Share Posted August 15, 2008 i use one of two methods... first, i use blue painters tape and make a box of where i want the badge to go. i remove and place, then step back and do it until im satisfied. then i line the emblem up with the tape, and place the emblem on the vehicle, and remove the tape. perfect every time. the other method- i leave the backing on the emblem, and use a piece of tape on each end of the emblem to place it where i want. then i step back and look, adjust as needed. when im satisfied, i carefully remove one side of the tape, lift and start to remove backing and work from one end to the other. hope those helped Quote Link to comment Share on other sites More sharing options...
nastyss Posted August 15, 2008 Report Share Posted August 15, 2008 i used a tape measure on each side worked out awesome Quote Link to comment Share on other sites More sharing options...
eddieo818 Posted August 15, 2008 Report Share Posted August 15, 2008 i use one of two methods... first, i use blue painters tape and make a box of where i want the badge to go. i remove and place, then step back and do it until im satisfied. then i line the emblem up with the tape, and place the emblem on the vehicle, and remove the tape. perfect every time. the other method- i leave the backing on the emblem, and use a piece of tape on each end of the emblem to place it where i want. then i step back and look, adjust as needed. when im satisfied, i carefully remove one side of the tape, lift and start to remove backing and work from one end to the other. hope those helped im with method 2 Quote Link to comment Share on other sites More sharing options...
KJT13 Posted August 15, 2008 Report Share Posted August 15, 2008 i use one of two methods... first, i use blue painters tape and make a box of where i want the badge to go. i remove and place, then step back and do it until im satisfied. then i line the emblem up with the tape, and place the emblem on the vehicle, and remove the tape. perfect every time. the other method- i leave the backing on the emblem, and use a piece of tape on each end of the emblem to place it where i want. then i step back and look, adjust as needed. when im satisfied, i carefully remove one side of the tape, lift and start to remove backing and work from one end to the other. hope those helped I used method 1. my emblems also had line-up pins on the back so I had to grind them off before placing. Quote Link to comment Share on other sites More sharing options...
sswolfpac Posted August 15, 2008 Report Share Posted August 15, 2008 where did you get your emblems from? Quote Link to comment Share on other sites More sharing options...
KJT13 Posted August 16, 2008 Report Share Posted August 16, 2008 where did you get your emblems from? ebay Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted August 16, 2008 Report Share Posted August 16, 2008 if your looking for "cowl induction" emblems, stylintrucks.com sells those as well as ^^ebay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.