mgawlik1 Posted August 30, 2008 Report Posted August 30, 2008 DESCRIPTION: Chevy LS2 (243 Castings) heads off a 2007 TrailblazerSS. These heads were ported/polished by Greg Good in Houston, TX along with all the upgrades which include Rev Stainless Steel 2.055" Intake/1.60" Exhaust Valves, Patriot Performance Xtreme Springs (.660" lift), Titanium Retainers, Super7 locks and Viton rubber seals. You can see from below the great flow numbers from these heads. I know flow numbers are not the most important data when evaluating heads, but it is the only data I have. They were on my truck for about 7500 miles before I decided to return to stock. I also have a New set of LS1 Head gaskets that will go with them if you need them. Really need these to move. Please contact me if interested. PM or email: [email protected] PICS: I realize I could have spent more time cleaning them up, but it is what it is. For more images: http://tx-ss.com/heads.htm DATA: Flow numbers for these heads versus published data from other vendors and head styles These Heads: Flowed at 28" h2o on SuperFlow 600 at 4.00" Bore LIFT .100 .200 .300 .400 .500 .550 .600 INT n/a 147 225 279 321 333 337 EXH n/a 126 171 215 237 240 244 Compared to: (from GM High Tech Magazine) http://www.gmhightechperformance.com/tech/...eads/index.html AFR (2.02/1.60) LIFT .100 .200 .300 .400 .500 .550 .600 INT 68.6 152.9 217.4 263.9 300.7 318.6 EXH 58.6 115.9 168.8 205.4 219.8 229.9 DART (2.02/1.60) LIFT .100 .200 .300 .400 .500 .550 .600 INT 66.3 131.1 195.5 232.4 266.6 275.5 261.3 EXH 50 96 138 174.5 196 204.3 EDELBROCK (2.02/1.57) LIFT .100 .200 .300 .400 .500 .550 .600 INT 64.8 141 197.9 247.4 280.4 302.9 EXH 55.9 105.5 151.9 191.3 207.2 216.8 LIVERNOIS(2.08/1.575) LIFT .100 .200 .300 .400 .500 .550 .600 INT 66.2 149 215.5 266 305.5 325 EXH 59.5 116.7 158 195.5 215.6 225 TFS (2.04/1.575) LIFT .100 .200 .300 .400 .500 .550 .600 INT 68.6 147.8 218.9 267 309.7 327.6 EXH 56.0 113.5 175.2 216.6 229.3 238.9 L92 HEADS: (STOCK) Tested on 4.125 Bore http://www.gmhightechperformance.com/tech/...eads/specs.html LIFT .100 .200 .300 .400 .500 .550 .600 INT 79.2 153 225 276 309.6 323.2 332.2 EXH 57.8 114.4 147.2 170.3 183.1 186 189.5 Scoggin Dickey CNC L92 http://www.sdparts.com/product/SD8800/Cyli...iftSprings.aspx LIFT .100 .200 .300 .400 .500 .550 .600 INT 69 154 222 266 309 345 EXH 46 100 136 166 189 202 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.