2006SilverSS Posted September 2, 2008 Report Posted September 2, 2008 Hey guys, I did a search but didn't come up with anything useful. For a while now I've noticed that my side mirrors don't always remember the position that I set them to. It's more often than not, that it doesn't remember. When I had the truck at the dealer last week I asked them to check it out, and of course they said that they couldn't find anything wrong. No codes or anything in the computer so that was that. Has anyone else come across this issue? It seems to mainly happen on the drivers side mirror and the vertical positioning. Any thoughts would be appreciated. Thanks. Quote
benjaminh2 Posted September 3, 2008 Report Posted September 3, 2008 (edited) have the dealer check the software calibration on the driver and passenger door modules, could need updating. use bulletin# 07-08-64-022A as a reference. 9 times outa 10 these intermitant minor problems are the result of outdated software. good luck Edited September 3, 2008 by gmperformanceguy (see edit history) Quote
2006SilverSS Posted September 4, 2008 Author Report Posted September 4, 2008 I'll be sure to note that down and take it to them, Thanks for the info Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.