20_blkss_04 Posted February 1, 2009 Report Share Posted February 1, 2009 hey guys just thought ide share some photos of my new amp rack i made! total cost was about 15 bucks and didnt take very long but the its just what i wanted. nice and clean! i know i got a rcsb but im sure you guys could do sumin similiar behind your seats! Quote Link to comment Share on other sites More sharing options...
70chevy03ss Posted February 1, 2009 Report Share Posted February 1, 2009 Nice job frankie looks good Quote Link to comment Share on other sites More sharing options...
Jaymz Posted February 1, 2009 Report Share Posted February 1, 2009 sweet Quote Link to comment Share on other sites More sharing options...
mcmahan Posted February 1, 2009 Report Share Posted February 1, 2009 looks good clean work Quote Link to comment Share on other sites More sharing options...
20_blkss_04 Posted February 1, 2009 Author Report Share Posted February 1, 2009 thanks guys ill post up some pics of the sub/box tomro! Quote Link to comment Share on other sites More sharing options...
fox_forma Posted February 1, 2009 Report Share Posted February 1, 2009 is that the cardboard type board? Isn;t that stuff not that sturdy? Quote Link to comment Share on other sites More sharing options...
20_blkss_04 Posted February 1, 2009 Author Report Share Posted February 1, 2009 lol noone is seeing the pics rite on the forums that i posted this up! i used the cardboard to make a template for the metal stock i used! its all metal behind the carpet no cardboard! it looks just like this ! Quote Link to comment Share on other sites More sharing options...
fox_forma Posted February 1, 2009 Report Share Posted February 1, 2009 ok i must be blind because in the pics you posted all I see is the cardboard crap, then your amp mounted, looks good mounted though! Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted February 2, 2009 Report Share Posted February 2, 2009 nice work Quote Link to comment Share on other sites More sharing options...
20_blkss_04 Posted February 2, 2009 Author Report Share Posted February 2, 2009 thanks guys and look in the pics with the cardboard you can see a metal strip in there! its the second pic! Quote Link to comment Share on other sites More sharing options...
fox_forma Posted February 2, 2009 Report Share Posted February 2, 2009 (edited) yeah i see the metal strip but see it as just a metal strip, did you make it like the pic below my one post then? I figured you were doing a build up thread of your amp rack so I was confused when I saw just a piece of card board and that metal strip. I thought the metal was what you used to cut a straight line. ha Edited February 2, 2009 by fox_forma (see edit history) Quote Link to comment Share on other sites More sharing options...
20_blkss_04 Posted February 2, 2009 Author Report Share Posted February 2, 2009 lol yea thats my bad i shud of showed it or explained it better but yea i basically built what i pictured with the metal strip in the pic i used the cardboard to make a template! Quote Link to comment Share on other sites More sharing options...
8 UR HMI Posted February 3, 2009 Report Share Posted February 3, 2009 lol yea thats my bad i shud of showed it or explained it better but yea i basically built what i pictured with the metal strip in the pic i used the cardboard to make a template! looks good man. mine would raddle too much so my back wall has 25 sq feet of dynamat, doors have about 10 on each (all 4) my floor in the back has about 40 and my roof has about 50. my amps are on the back wall with a distrib. , digital volt, cap on back hump and subs are in a crappy box right now while my new box is being built. im doin a fiberglass with SS in the middle. Quote Link to comment Share on other sites More sharing options...
20_blkss_04 Posted February 3, 2009 Author Report Share Posted February 3, 2009 WOW!!! that sounds like an awosme system! did the sound dedeanor work good? would you say its a good idea to do it? im debating ive herd its not worth the moeny and that it is!? what did you use>? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.