stylnss Posted May 24, 2009 Report Share Posted May 24, 2009 Just re-installed my stock bumpstops after removing the bracket and cutting two nubs off. The belltech pancakes that came with my kit sucked! Doesn't bottom out anymore but seems to be a little bit bumpy in the rear. The bumpstops seem to be right at the axle. Not too much room. Is that right or should I cut off another nub and drill some relief holes? What seems to be working for you? Thanks! Quote Link to comment Share on other sites More sharing options...
shakesvho Posted May 25, 2009 Report Share Posted May 25, 2009 whats your drop Quote Link to comment Share on other sites More sharing options...
stylnss Posted May 25, 2009 Author Report Share Posted May 25, 2009 2-3 spindles with hangers with shackles Quote Link to comment Share on other sites More sharing options...
shakesvho Posted May 26, 2009 Report Share Posted May 26, 2009 (edited) I have a 2/4 and I don't bottom out, I have drop shocks in the rear the bracket removed and a set of Bellteck Urethane Drop Bumpstops Rear #B4922.(this is not the flat type stop it has maybe 3 or 4 rows that go to a point like a oem stop just smaller) Edited May 27, 2009 by shakesvho (see edit history) Quote Link to comment Share on other sites More sharing options...
Tzer Posted May 27, 2009 Report Share Posted May 27, 2009 (edited) I have a 2/4 and I don't bottom out, I have drop shocks in the rear the bracket removed and a set of Bellteck Urethane Drop Bumpstops Rear #B4923.(this is not the flat type stop it has maybe 3 or 4 rows that go to a point like a oem stop just smaller) OK I give up. Where does one find these Belltech Urethane Drop Bumpstops Rear #B4923 & #84922? I've searched around but cant find a store to purchase. I gotta get something different. I deformed a DJM pancake stop this morning. Edited May 27, 2009 by Tzer (see edit history) Quote Link to comment Share on other sites More sharing options...
Tzer Posted May 27, 2009 Report Share Posted May 27, 2009 Nevermind, I just called Belltech and ordered them from there directly. Funny how you can't find them online or on the Belltech site. I went with the #B4922 Bellteck Drop Bumpstops though. He said thats what they use on the flip kits, It's more a foam that controls or slows down the bump. It's 1½" tall. I'll let you guys know how they go for me. Quote Link to comment Share on other sites More sharing options...
shakesvho Posted May 27, 2009 Report Share Posted May 27, 2009 (edited) you are right the 4922 work well on the rear and the 4923 for the front, had it backways Edited May 27, 2009 by shakesvho (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.