superchevything Posted December 11, 2009 Report Share Posted December 11, 2009 My alarm sets but it doesnt lock or unlock my doors anymore . I have to use my key to lock and unlock my door until i figure out whats going on does anybody know what could be the problem??? Quote Link to comment Share on other sites More sharing options...
blackbeast ss Posted December 11, 2009 Report Share Posted December 11, 2009 did you disconnect your battery by any chance? Quote Link to comment Share on other sites More sharing options...
fast4popper Posted December 11, 2009 Report Share Posted December 11, 2009 one of two things. does it chirp when you "arm" it? if so, then the door lock module either lost power or lost programming. bring it back to where you got it installed and have them fix it. if it doesnt chirp, you have your alarm in VALET mode, meaning it wont arm so that mechanics can work on it. open a door, then hit the lock, then the unlock then the lock button all within 10 seconds. this will get you back to working properly. good luck and if you have any probs PM me. -C- Quote Link to comment Share on other sites More sharing options...
8 UR HMI Posted December 11, 2009 Report Share Posted December 11, 2009 ur relays in ur door could be out as well. mine blew a resistor and stopped unlocking my door and thats how i was broken into. who did ur install? Quote Link to comment Share on other sites More sharing options...
superchevything Posted December 11, 2009 Author Report Share Posted December 11, 2009 Yeah my battery got disconnect because of that cheap ass nut they replaced it for my amp to get power came off. I didnt know it was off till i tried my auto start and it didnt start so i was like wtf . So i went to my truck and used my key to unlock my truck to pop the hood and yup it was the positive and the 8 gauge was hanging loose. I got both wires and the nut screwed it back in and my alarm went off. So i turned the alarm off i didnt pay no mind till last sunday when i opend my door to my truck and turned it my alarm went off so i turned off my truck and unlocked my alarm so thats when i found out my alarm wasnt working right. Quote Link to comment Share on other sites More sharing options...
blackbeast ss Posted December 11, 2009 Report Share Posted December 11, 2009 Yeah my battery got disconnect because of that cheap ass nut they replaced it for my amp to get power came off. I didnt know it was off till i tried my auto start and it didnt start so i was like wtf . So i went to my truck and used my key to unlock my truck to pop the hood and yup it was the positive and the 8 gauge was hanging loose. I got both wires and the nut screwed it back in and my alarm went off. So i turned the alarm off i didnt pay no mind till last sunday when i opend my door to my truck and turned it my alarm went off so i turned off my truck and unlocked my alarm so thats when i found out my alarm wasnt working right.yeah same thing happend to me,you need to go were you got it installed and have them reprogram it 95% of the time they will do it for free only takes about 3 min..........good luck Quote Link to comment Share on other sites More sharing options...
superchevything Posted December 11, 2009 Author Report Share Posted December 11, 2009 yeah same thing happend to me,you need to go were you got it installed and have them reprogram it 95% of the time they will do it for free only takes about 3 min..........good luck thanks but i bought the truck from a guy on the forum in the LA area so maybe a shop can hook me up or something. Quote Link to comment Share on other sites More sharing options...
blackbeast ss Posted December 11, 2009 Report Share Posted December 11, 2009 (edited) thanks but i bought the truck from a guy on the forum in the LA area so maybe a shop can hook me up or something.yeah!!!! try this turn the ignition on the on position and with driver door opened hit the lock button a lot of times and see if that works........ Edited December 11, 2009 by blackbeast ss (see edit history) Quote Link to comment Share on other sites More sharing options...
superchevything Posted December 13, 2009 Author Report Share Posted December 13, 2009 yeah!!!! try this turn the ignition on the on position and with driver door opened hit the lock button a lot of times and see if that works........ Victory B*&^%3$!!!!!! It worked thanks for the hook up. Quote Link to comment Share on other sites More sharing options...
blackbeast ss Posted December 14, 2009 Report Share Posted December 14, 2009 Victory B*&^%3$!!!!!! It worked thanks for the hook up.hahaha niceeeeee! glad i could help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.