Fireman31 Posted July 6, 2010 Report Share Posted July 6, 2010 If your truck isn't a Daily Driver and sits alot, you may encounter this problem. Recently, I had a flood in my SSS. Driver's Side and Passenger Side floor boards front to rear were soaked with water after a 5 hour road trip with the A/C on. No, it didn't rain at all. Upon checking the A/C Evaporator Drain Tube, I noticed it was dry. After sucking the water out of the rug with a shop vac, here is what you need to do to clear the clogged tube..... TOOLS NEEDED - pipe cleaners, found at any craft store or smoke shop wet/dry vac Febreze Step 1 : Locate the drain tube(Passenger Side firewall under AC Accumulator). Step 2 : Remove the drain tube from the AC Evaporator outlet(Grab and twist/pull). Step 3 : Use a pipe cleaner and clean out the drain tube. Step 4 : Use a pipe cleaner and clean out the AC Evaporator drain outlet, you may see the obstruction, but be careful not to knock it into the Evaporator.....You will get a nice gush of water as the Evaporator drains out. Please note that it may also drain back into the cab of your truck too, so have your shop vac ready. Step 5 : Re-install the drain tube and run your truck's A/C to make sure the drain is working properly. This is what came out if mine, it was right at the opening to the Evaporator..... ....a spider's nest full of eggs! NOTE - Do not use compressed air, not only can you blow the obstruction into the Evaporator, if it is really stuck(like mine was), compressed air won't even do anything to remedy the clog. Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted July 6, 2010 Author Report Share Posted July 6, 2010 Forgot to mention, failing to correct this issue will result in a moldy smell in your truck, puddles on your floor, and worse yet.......a blown blower motor and resistor. Quote Link to comment Share on other sites More sharing options...
wody Posted July 6, 2010 Report Share Posted July 6, 2010 (edited) good info danjamin! there is an a/c coil cleaner that i'm sure is available at any major automotive store. that stuff works wonders. clean out the drain tube and just pinch them on occation to make sure they are clear. every-now-and-then, its also a good idea to run the fresh air for a while and not only recirculation, this will help cure that raunchy mold smell. with that much restriction around your evaporator, you were probably getting some ice build up. on the freightliner M2 business class trucks, the a/c system will actually shut off if the filter is plugged up, but that doesn't always prevent the blower motor from overheating and burning the wires. if you live in a humid envorinment and see the condensation from the evaporator dripping on the outside of the truck, then its pretty safe to say that your drain tube is clean, but if not...you may want to check them. unfortunately, if you live a dry environment, like vegas, you won't always see water dripping, so it is a good habit to get in at every oil change just to squeeze the drain tube. Edited July 6, 2010 by WODY™ (see edit history) Quote Link to comment Share on other sites More sharing options...
ynot333 Posted July 23, 2010 Report Share Posted July 23, 2010 good info danjamin! there is an a/c coil cleaner that i'm sure is available at any major automotive store. that stuff works wonders. clean out the drain tube and just pinch them on occation to make sure they are clear. every-now-and-then, its also a good idea to run the fresh air for a while and not only recirculation, this will help cure that raunchy mold smell. with that much restriction around your evaporator, you were probably getting some ice build up. on the freightliner M2 business class trucks, the a/c system will actually shut off if the filter is plugged up, but that doesn't always prevent the blower motor from overheating and burning the wires. if you live in a humid envorinment and see the condensation from the evaporator dripping on the outside of the truck, then its pretty safe to say that your drain tube is clean, but if not...you may want to check them. unfortunately, if you live a dry environment, like vegas, you won't always see water dripping, so it is a good habit to get in at every oil change just to squeeze the drain tube. evap-foam for the indoor and nubrite for the out door one.............. Quote Link to comment Share on other sites More sharing options...
1slow03 Posted August 12, 2010 Report Share Posted August 12, 2010 Nice my tuck is doing this and i was wondering how to fix it thanks for the info. Quote Link to comment Share on other sites More sharing options...
JroCk817 Posted March 9, 2012 Report Share Posted March 9, 2012 GLAD I FOUND THIS!!! I was having the same problem... Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted March 10, 2012 Author Report Share Posted March 10, 2012 Quote Link to comment Share on other sites More sharing options...
RevMedic Posted October 11, 2016 Report Share Posted October 11, 2016 First day on this site & you fixed my problem (I think)! My climate control blower went out. Took it to the Chevy dealer, they told me it was full of water. Referred me to a body shop to check for leaks. They wouldn't take my money, gave me a couple ideas of likely trouble spots. They didn't pan out. Checked with the mechanic at work, who mentioned this issue. Confirmed with a parts guy at another Chevy dealership. So, using the above how-to, I pulled off the angled drain tube & a good pint of water came out! It was the tube that was plugged. Now, wait to see if any other source of the water shows up, and replace my blower. Thanks! Quote Link to comment Share on other sites More sharing options...
Momjo Posted July 8, 2019 Report Share Posted July 8, 2019 Help me locate the passenger side firewall? I feel dumb, but do you jack up the truck and find it underneath or do you go to it thru passenger door under glove compartment? Quote Link to comment Share on other sites More sharing options...
someotherguy Posted July 8, 2019 Report Share Posted July 8, 2019 Under the hood, passenger side, rear of engine compartment. Look for the silver "bottle" (A/C accumulator) pictured in the original post. The drain outlet is underneath. Richard Quote Link to comment Share on other sites More sharing options...
hig Posted August 13, 2019 Report Share Posted August 13, 2019 I have this same problem, but mine is draining. Last year I pulled the dash and replaced the heater coil. When I installed the dash, I didn't line up the drain hose and it ended up pinched. I figure this out a few days after driving it and didn't want to pull the dash again. So I used some tools to pull the line back through the firewall. When doing this, I messed up the 90 degree fitting, so I just left it off. Now, my a/c works great and I get a lot of condensation dripping on the ground. This weekend I realize the floor was soaked. I pulled the carpet back and see the water is running behind plastic cover that is attached to the firewall. I'm not sure where it's leaking from or how/why considering how much is dripping out of the hose. So I'm trying to figure out a solution without pulling the dash. Any thoughts? I think I would rather drill a hole in my floor than have to pull the dash again. Keith Quote Link to comment Share on other sites More sharing options...
Tommy Boy Posted May 26, 2020 Report Share Posted May 26, 2020 Hey Keith, I'm having the same problem. The drain is open as water drains out, but the box is leaking inside. I was able to remove the first cover which basically covers the heater core. But then there is a 2nd cover for the A/C evaporator and that's what's leaking. but it's very hard to see where or why it's leaking. You can take this 2nd cover lose a bit, but I can't remove it without taking the dash out. So I'm thinking to use some RTV and try to seal up the 2nd cover. Just curious if you figured this out and solved it yet. Seems like we have the exact same issue. Quote Link to comment Share on other sites More sharing options...
GunPowder Posted October 30, 2022 Report Share Posted October 30, 2022 I was having the drips and water running into the cab. 2015 duramax. Found to be a hole chewed into the bottom of the housing from a mouse about 4inches from the firewall. Going to try JB Weld plastic putty. Wish me luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.