firehawknwv Posted July 20, 2010 Report Share Posted July 20, 2010 I was wondering if there was a way to correct the "chevy lean"? I couldnt really find much on it It just sux a lil that the drivers side of the truck leans a bit lower than the left especially after lowering it. I jsut wasnt sure if its something that can be corrected or not. Quote Link to comment Share on other sites More sharing options...
smoothdime Posted July 20, 2010 Report Share Posted July 20, 2010 thats the beauty of torsion bars. just adjust the lower side bar until you get your desired stance. if you adjust it quite a bit an alignment is recomended. good luck. gary Quote Link to comment Share on other sites More sharing options...
firehawknwv Posted July 20, 2010 Author Report Share Posted July 20, 2010 I didnt know the T-bars would control the lean in the rear. Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted July 20, 2010 Report Share Posted July 20, 2010 It's common, I have seen many with it including my own. I wouldn't worry about it IMO, gives the truck character. Quote Link to comment Share on other sites More sharing options...
smoothdime Posted July 21, 2010 Report Share Posted July 21, 2010 I didnt know the T-bars would control the lean in the rear. say you lower the left front, its going to slightly raise the right rear. but i thought you were talking about the front since most "chevy lean" is refering to the front end not the rear. Quote Link to comment Share on other sites More sharing options...
firehawknwv Posted July 21, 2010 Author Report Share Posted July 21, 2010 I have a 2/3 belltech drop. My drivers rear fender is closer to the tire than the pass side by abour 1/4 to 1/2 inch. I still have to cut the bottom ring of the front bumpstops off cuz its rough riding and jsut havent gotten to it yer. Aslo plan to bring the t-bars down just a tad. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.