firehawknwv Posted December 29, 2010 Report Share Posted December 29, 2010 (edited) Well I just got my BSER Roll pan in today from WODY. I plan on installing it closer to spring time so that I will be able to have the truck in the shop a couple of days and drive my Firebird. Here are just a couple pics I snapped after I took it out of the box. I cant wait to loose the extra weight on the back of the truck with the stock bumper and add this for a nice look. THANX WODY!!! I do have one question though. Do any of you know if you can have areas cut out by the license pate to add the stock bumper light sockets? If not what route shoudld I got to get light back there? Edited December 29, 2010 by firehawknwv (see edit history) Quote Link to comment Share on other sites More sharing options...
SSplaytoy Posted December 29, 2010 Report Share Posted December 29, 2010 You can cut holes to fit the stock lights or order the rectangular ones off fbimini.com and cut a hole for those to fit. IMO, the flat aftermarket ones look better. If you get those, just order a spare or two in case it goes out because the bulb isn't replaceable without undoing all the glue and re-soldering wires inside it. Do you plan on molding the rollpan in? If so, shave the tailgate handle too. It gives the ass a way cleaner look. Quote Link to comment Share on other sites More sharing options...
mcmahan Posted December 29, 2010 Report Share Posted December 29, 2010 Awesome Chris. I still need to get mine painted. Congrats! Alan is the man! Quote Link to comment Share on other sites More sharing options...
alex.t Posted December 29, 2010 Report Share Posted December 29, 2010 you can buy scews that have little lights on them that charge from the sun or some shit, that would look good Quote Link to comment Share on other sites More sharing options...
wody Posted December 30, 2010 Report Share Posted December 30, 2010 glad you got it! Quote Link to comment Share on other sites More sharing options...
funceca88 Posted December 30, 2010 Report Share Posted December 30, 2010 cant whait to see it on. congrats:thumbsup: Quote Link to comment Share on other sites More sharing options...
firehawknwv Posted December 30, 2010 Author Report Share Posted December 30, 2010 Well I have LED lights in the stock ones now and Id liek to utilize LEDs on the roll pan as well. No at this point in time i dont plan to mold it. I may do this down the road when I 2-tone the truck. I was thinking of doing the SS black on top and the arrival blue as it is now or silver birch on top. I didnt rally wanna get too crazy with a paint job whne i do it. I was thinkig of doing something to seperate the 2 colors but not sure yet. That will be somethin I do way later on down the road. First I plan on getting one of those cowl ram air induction hoods around the first of the year so I can put the pan and hood on at the same time. Quote Link to comment Share on other sites More sharing options...
Porno Joe Posted January 3, 2011 Report Share Posted January 3, 2011 mold it in! and I use he bolts with the led lights in em. makes for a much cleaner look than cutting it for stock bumper lights: Quote Link to comment Share on other sites More sharing options...
Porno Joe Posted January 3, 2011 Report Share Posted January 3, 2011 found the lighted bolts: My link Quote Link to comment Share on other sites More sharing options...
2bfast Posted January 3, 2011 Report Share Posted January 3, 2011 damn thats clean.....props Quote Link to comment Share on other sites More sharing options...
firehawknwv Posted January 4, 2011 Author Report Share Posted January 4, 2011 That does look real good man but I wont have the money right now to get it molded I dont think as Ive got a few other thigns to finish first. Thanx for the link but it doesnt say if the bulbs are LED or not.. Are those the ones you have? Quote Link to comment Share on other sites More sharing options...
Porno Joe Posted January 6, 2011 Report Share Posted January 6, 2011 Im not 100% sure they are leds, I want to say yes they are- but either way they are super bright. Quote Link to comment Share on other sites More sharing options...
firehawknwv Posted January 8, 2011 Author Report Share Posted January 8, 2011 Well if someone comes acrossed a set of LED lights like that or that would work in the roll pan post them up. Quote Link to comment Share on other sites More sharing options...
Ruben525 Posted January 8, 2011 Report Share Posted January 8, 2011 damn thats clean.....props looks really good Quote Link to comment Share on other sites More sharing options...
Miller812 Posted January 8, 2011 Report Share Posted January 8, 2011 When I got my license plate relocater on my ninja it came with led licensce plate bolt lights. Ill take a pic of them when I get home here shortly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.