BlkSSnCpt Posted January 31, 2011 Report Share Posted January 31, 2011 i plan on installing some fogs on the SS but i'm sure how i'm gonna mount them... i got them off of my bro's 04 Tahoe before he traded it in, they're the OEM fogs... anyways, can u guys post up ur mounts/brackets please... thnx in advance... -Rob Quote Link to comment Share on other sites More sharing options...
ThatTallCanadian Posted January 31, 2011 Report Share Posted January 31, 2011 Mine had fogs on it when i already bought it. I will take some pics tomorrow for you after I wash the girl. Quote Link to comment Share on other sites More sharing options...
The_aSSet Posted January 31, 2011 Report Share Posted January 31, 2011 kinda crappy but maybe these will help Quote Link to comment Share on other sites More sharing options...
catdaddy300 Posted January 31, 2011 Report Share Posted January 31, 2011 i cut the ducts to make them fit.... i did a good job but do the brackets way better Quote Link to comment Share on other sites More sharing options...
NTMD8R_SS Posted January 31, 2011 Report Share Posted January 31, 2011 This is how i did mine, i removed the grilles and made the fog lights touch the duct after the pics where taken during a test fit. Quote Link to comment Share on other sites More sharing options...
BlkSSnCpt Posted February 1, 2011 Author Report Share Posted February 1, 2011 thnx for the pics guys, i dont plan on putting them in the ducts tho, i want to mount them in the bumper center grill... right under/next to the liscense plate holder... -Rob Quote Link to comment Share on other sites More sharing options...
kelleyperformance Posted February 7, 2011 Report Share Posted February 7, 2011 Here's my setup... I used trailblazer ss housings, OEM z06 bulbs and ballasts. Made brackets from small pieces of aluminum. Quote Link to comment Share on other sites More sharing options...
BlkSSnCpt Posted February 7, 2011 Author Report Share Posted February 7, 2011 KP ur setup is VERY similiar to wat i want to do with my future setup, i actually wanted to install a TBSS lower grill and actually went to the dealer priced it but ofcourse the grill on the TB is short then ours... anyways; do u have pics of the back side of the fogs??? a pics of the mounts??? i've never seen the underside of a TBSS bumper so i dont know how their foglight setup looks like... any addition pic would REALLY REALLY help... can the fogs be bought seperately??? or does it have to be bought as a whole assembly with the lower grill??? -Rob Quote Link to comment Share on other sites More sharing options...
superredss Posted February 7, 2011 Report Share Posted February 7, 2011 Hey John that looks really good!! How much would you estimate the parts for that install? And Rob I thought about the same thing a while back with the TB lower grill. I always wondered if it would fit into our lower grill or not. Oh well, time to come up with something else. Quote Link to comment Share on other sites More sharing options...
catdaddy300 Posted February 7, 2011 Report Share Posted February 7, 2011 i do like those fogs in the middle grill i might add some of those along with the ones i already go in the ducts Quote Link to comment Share on other sites More sharing options...
BlkSSnCpt Posted February 7, 2011 Author Report Share Posted February 7, 2011 Hey John that looks really good!! How much would you estimate the parts for that install? And Rob I thought about the same thing a while back with the TB lower grill. I always wondered if it would fit into our lower grill or not. Oh well, time to come up with something else. yeah i was actually thinking about molding them in to the stock grill on the truck because it looks so clean on the TBSS, but i figured it would look just as good behind the grill and a little more stealth... -Rob Quote Link to comment Share on other sites More sharing options...
superredss Posted February 8, 2011 Report Share Posted February 8, 2011 Molding them into the grill would probably look good, and I agree, the TBSS look is very clean. I haven't thought about this approach at all. I started looking up parts and this doesn't look to be cheap at all! Quote Link to comment Share on other sites More sharing options...
BlkSSnCpt Posted February 8, 2011 Author Report Share Posted February 8, 2011 Molding them into the grill would probably look good, and I agree, the TBSS look is very clean. I haven't thought about this approach at all. I started looking up parts and this doesn't look to be cheap at all! actually when i went to the dealer i remember the grill was only like $40-$50, IIRC... depending on weather i can figure out the brackets i MIGHT still mod the TBSS grill and an SSS grill together, would be a nice little project... -Rob Quote Link to comment Share on other sites More sharing options...
nastyhabit Posted February 8, 2011 Report Share Posted February 8, 2011 The fogs behind the lower center grill are something I never thought of but DAMN they look good all hidden back there. I remember from another project Hella has a black lens series.... Hmmmm Quote Link to comment Share on other sites More sharing options...
BlkSSnCpt Posted February 8, 2011 Author Report Share Posted February 8, 2011 The fogs behind the lower center grill are something I never thought of but DAMN they look good all hidden back there. I remember from another project Hella has a black lens series.... Hmmmm yea its wat i've alwasy wanted to do but was always affraid to try and mount them and wire them up and so on and so forth... but yeah Hella definately has some real nice sets, and their output is GREAT for how small they are... little pricey but definatly worth it imo... -Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.