lowbuckx Posted February 10, 2011 Report Share Posted February 10, 2011 My Ignition lock cylinder is sloppy and you have to fiddle with it to turn sometimes. Any tips or how tos to replace it? Thanks Quote Link to comment Share on other sites More sharing options...
paulguy Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) Pop off the steering column cover, stick a pick into the hole on the top above the cylinder, turn the key to the start position and pull the assembly out. If you don't have a new cylinder handy, you might wanna disconnect the battery first. Edited February 11, 2011 by paulguy (see edit history) Quote Link to comment Share on other sites More sharing options...
lowbuckx Posted February 11, 2011 Author Report Share Posted February 11, 2011 I changed one in my 72 Nova and this sounds like a peice of cake in comparison... Thanks Pop off the steering column cover, stick a pick into the hole on the top above the cylinder, turn the key to the start position and pull the assembly out. If you don't have a new cylinder handy, you might wanna disconnect the battery first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.