Jump to content

Po155


Recommended Posts

I recently just bought an 03 silverado ss. And yesterday while driving I threw a cel. It was running rough and wouldn't really accelerate. I went and scanned it and got the code PO155 o2s heater ckt malfunction 2/1. I'm assuming the o2 sensor is bad. Does 2/1 mean bank 2 front sensor? If so whichis bank 2, the drivers side or the passenger side? Thanks for any help.

Link to comment
Share on other sites

I recently just bought an 03 silverado ss. And yesterday while driving I threw a cel. It was running rough and wouldn't really accelerate. I went and scanned it and got the code PO155 o2s heater ckt malfunction 2/1. I'm assuming the o2 sensor is bad. Does 2/1 mean bank 2 front sensor? If so whichis bank 2, the drivers side or the passenger side? Thanks for any help.

 

here is what i could find.

 

P0155 Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction

 

Possible CausesSetting Conditions

  • HO2S heater connector is damaged (check pins for damage, and for moisture)
  • HO2S heater control circuit is open, shorted to ground or shorted to voltage
  • HO2S heater power (12v) circuit is open (check power circuit from EFI relay)
  • HO2S heater has failed
  • ECM has failed

Engine running; and the ECM detected that the Bank 2 Heated Oxygen Sensor 1 (HO2S 2/1) heater current exceeded 2 amps, or it was less than 0.25 amps.

 

This code sets in 2 Trip(s).

This code will turn on the MIL (Malfunction Indicator Lamp)

Edited by red04supersport (see edit history)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...