zachm89 Posted March 22, 2011 Report Share Posted March 22, 2011 Alright guys, i recently installed a P1sc on my truck with a 3.4 pulley running at about 10-12 psi. I have a few things in mind to do to the truck next but don't know in what order I should tackle them or if there is anything else I should focus on instead. I've got a little audio project going on at the moment but that can be put on hold for more important things. My current thoughts are switching to a hydraboost setup for better braking and also a detroit trutac for out back to make sure nothing goes kaboom. I'm also setting the truck up for speed density with a relocated IAT sensor and 2 bar MAP sensor since with the procharger the MAF was completely maxed out and the truck ran like crap. Any info on which direction to head first or any suggestions on other things to take on are greatly appreciated. Thanks in advance fellas! Zach Quote Link to comment Share on other sites More sharing options...
Fireman31 Posted March 23, 2011 Report Share Posted March 23, 2011 speed density, TrueTrac, hydroboost, audio IMO.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.