canadianVRss Posted April 4, 2011 Report Share Posted April 4, 2011 I'm totally clueless on plugs. I know I need an iridium plug none projected tip. What about this. BR8EIX-solid iridium Quote Link to comment Share on other sites More sharing options...
Krambo Posted April 4, 2011 Report Share Posted April 4, 2011 I would choose a standard copper electrode plug, with a recessed tip. I would not spray an iridium or platinum tipped plug. What modifications dou have? If you are relatively stock, I would suggest a NGK BR6EF up to a 100 shot. Quote Link to comment Share on other sites More sharing options...
thomp62301 Posted April 5, 2011 Report Share Posted April 5, 2011 I was using a standard copper style plug when I had my nitrous setup. Autolite 103's on a 150 shot. Quote Link to comment Share on other sites More sharing options...
canadianVRss Posted April 5, 2011 Author Report Share Posted April 5, 2011 Just LT headers, full exhaust, cai, 160 stat, tune, trans go HD ll, Tci servos. I'd be okay with a 6?! Quote Link to comment Share on other sites More sharing options...
Krambo Posted April 5, 2011 Report Share Posted April 5, 2011 Just LT headers, full exhaust, cai, 160 stat, tune, trans go HD ll, Tci servos. I'd be okay with a 6?! Yes, a heat range 6 will be ideal for you on the juice (up to 100 shot). Many spray the TR6 NGK plugs however there are much better and safer plugs to run. Like mentioned above, BR6EF would be best for your situation. Don't forget to pull a little bit of timing at WOT to prevent detonation. Run good fuel as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.