BlownFogger540 Posted October 7, 2011 Report Share Posted October 7, 2011 Any one know what to get a Cable Gas Pedal and cable out of for my 2003 Silvy Quote Link to comment Share on other sites More sharing options...
BlueAKSSS Posted October 7, 2011 Report Share Posted October 7, 2011 I would assume one from a 1999-2002 would easily bolt in with minor mods as there mostly the same truck just one with electric throttle and one without. Check your local junk yards for one. Quote Link to comment Share on other sites More sharing options...
BlownFogger540 Posted October 7, 2011 Author Report Share Posted October 7, 2011 ok thanks Quote Link to comment Share on other sites More sharing options...
johnstownhotrodsinc Posted October 7, 2011 Report Share Posted October 7, 2011 Lokar makes a somewhat "universal" throttle cable kit....I've used them on hot rods in the past, but its been all with carbs...don't know if they have different style ends for a throttle body or something that will work. www.Lokar.com Quote Link to comment Share on other sites More sharing options...
chpspecial Posted October 7, 2011 Report Share Posted October 7, 2011 You might also need the PCM from a cable operated truck... the newer ones (03+) might might not have the neccessary drivers to operate the IAC for them Quote Link to comment Share on other sites More sharing options...
BlownFogger540 Posted October 8, 2011 Author Report Share Posted October 8, 2011 You might also need the PCM from a cable operated truck... the newer ones (03+) might might not have the neccessary drivers to operate the IAC for them thats not a problem going to use a XFI since my 6 speed paddle shift is also controlled with a fast controller thought it would be easier Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.