evandostert Posted November 18, 2011 Report Posted November 18, 2011 (edited) So I am getting ready for my FAST install this weekend. I am reading that my engine is supposed to have this front coolant passage and the rear blocked off???? Does this sound right. I am not sure whats back behind the stock intake but this is not sounding right. This goes in upfront Uploaded with ImageShack.us [/img] Uploaded with ImageShack.us These plugs may be needed to block rear coolant passage??? Uploaded with ImageShack.us [/img] Uploaded with ImageShack.us Will this destroy something?? rear head heat up??? Edited November 18, 2011 by evand (see edit history) Quote
BlueAKSSS Posted November 18, 2011 Report Posted November 18, 2011 Yes that's correct, the front had the cross over and the rear is blocked off. Quote
detjoe Posted November 18, 2011 Report Posted November 18, 2011 Kurt Urban sells a kit to use them all, he says it evens out the hot spots in the head. or you could make your own our of a vette one Quote
Krambo Posted November 18, 2011 Report Posted November 18, 2011 (edited) I used the block off plugs for the rear. edit: what fast intake are you installing? Edited November 18, 2011 by Krambo (see edit history) Quote
evandostert Posted November 20, 2011 Author Report Posted November 20, 2011 I am going to stay as factory as possible unless it provides an actual improvement over a stock piece. That Kurt kit looked pretty cool but I am not a fan of adding a bunch of extra fitting to the motor. http://www.kurturbanperformance.com/ls-water-vapor-system.html I may call him if I decide on a short block. I am so tempted after reading zippy's engine build. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.