Jump to content

Volant Installed


Recommended Posts

pull the head lights. i put a lite coat of dielectric grease on the rubber boot, and made it easier to slide on. then you can tighten the clamp with a long screw driver, or a 5/16 on a extension. have a couple HD zip ties handy and ounce the tube is secured over the break duct, then tighten the clamp. take the zip ties and go around the tube and bumper bracket and tighten..very simple once you see it in place...


good luck

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...