03SSrado Posted January 9, 2012 Report Share Posted January 9, 2012 Hey guys i just purchased a whipple blower and want some more info about it like what model it is (2.9,3.1 etc) it says whipple 53100 and the other #s are 99-323-S . It does not take place of the manifold, mounts on the side and is a twin screw. If yall could fill me in id appreciate it alot!! Also i'm in need of a set of injectors... One more thing , what is the boost on stock pulley , 6 or 7 psi ish ?? Thanks in advance Quote Link to comment Share on other sites More sharing options...
gmJake Posted January 9, 2012 Report Share Posted January 9, 2012 Quote Link to comment Share on other sites More sharing options...
03SSrado Posted January 9, 2012 Author Report Share Posted January 9, 2012 Hmmmm? Quote Link to comment Share on other sites More sharing options...
kissfans03ss Posted January 9, 2012 Report Share Posted January 9, 2012 I dont think there are any Whippke guys on the site but if there are they will chime in...good luck Sent from my DROID BIONIC using Tapatalk Quote Link to comment Share on other sites More sharing options...
03SSrado Posted January 9, 2012 Author Report Share Posted January 9, 2012 I dont think there are any Whippke guys on the site but if there are they will chime in...good luck Sent from my DROID BIONIC using Tapatalk Thank you Quote Link to comment Share on other sites More sharing options...
caddy03pimpin Posted January 9, 2012 Report Share Posted January 9, 2012 might be a 2.3 post up some pics add some 8.1 marine injectors Quote Link to comment Share on other sites More sharing options...
03SSrado Posted January 9, 2012 Author Report Share Posted January 9, 2012 I saw a set on here for sale . They are plug and play? Quote Link to comment Share on other sites More sharing options...
himata13 Posted January 12, 2012 Report Share Posted January 12, 2012 Hey I am almost done installing mine. It is a 2.3 and the stock pulley should give you about 6lbs. Add injectors and a bigger pump! I spiced mine up a bit and added a linage feller cam and meth injection to the equation. MeTh should help to cool off some of the heat that is being push to the motor. Quote Link to comment Share on other sites More sharing options...
03SSrado Posted January 13, 2012 Author Report Share Posted January 13, 2012 Hey I am almost done installing mine. It is a 2.3 and the stock pulley should give you about 6lbs. Add injectors and a bigger pump! I spiced mine up a bit and added a linage feller cam and meth injection to the equation. MeTh should help to cool off some of the heat that is being push to the motor. thanks alot! i would appreciate any further info you have for me as far as installation is concerned. what i may and may not need Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.