t5150 Posted March 14, 2012 Report Share Posted March 14, 2012 i just install some 2 inch drop mcgaughys spindles on my 03 ss silverado awd and this thing is still to high .........? how much do i need to turn the torsion bars down,,,,,for it to b level,,,,,i have some 2 inch drop shakles in the back to.......it needs aligment bad ,,,,,,,,,,,,,,,,,and it seems like it cannot turn the wheels ,all the way like before any help,,,,,,,,,,is it normal.....?,,,,help please.............???? Quote Link to comment Share on other sites More sharing options...
Silverad0 SS Posted March 14, 2012 Report Share Posted March 14, 2012 (edited) just level it out with the the keys, turn them down and get it aligned. your front should actually be a inch lower then the back. Edited March 14, 2012 by Silverad0 SS (see edit history) Quote Link to comment Share on other sites More sharing options...
evandostert Posted March 14, 2012 Report Share Posted March 14, 2012 2" isn't a big drop and yes torsion bars need to be adjusted untill they just touch the front bump stops. Quote Link to comment Share on other sites More sharing options...
Wizard Posted March 14, 2012 Report Share Posted March 14, 2012 You will lose a bit of steering radius with those. Make sure your brake lines are not binding up. I had to replace mine with longer braided ones... Quote Link to comment Share on other sites More sharing options...
t5150 Posted March 14, 2012 Author Report Share Posted March 14, 2012 ok so i just turn the screw from the torsion bars down right like if i was to b taking the bolt off ,,,i really need aligment asap thanks for the help,,, Quote Link to comment Share on other sites More sharing options...
Silverad0 SS Posted March 15, 2012 Report Share Posted March 15, 2012 no problem and you need to cut some 2 notches off the front bump stops Quote Link to comment Share on other sites More sharing options...
t5150 Posted March 15, 2012 Author Report Share Posted March 15, 2012 o ok thanks for the help Quote Link to comment Share on other sites More sharing options...
Silverad0 SS Posted March 15, 2012 Report Share Posted March 15, 2012 Anything else, just shoot me a pm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.