BLOWN SS/T Posted March 31, 2012 Report Posted March 31, 2012 So for the front I have 2 part numbers 310400blt which I think is for like a spindle or key drop and then I just searches for the same size collapsed 10" and extended 14.75" and found part number 10104b which is a loop style. Also 10104i but its got that for sticking out sideways which I believe is for a coil setup. Let me know ASAP, or if it's a different part number thanks Quote
NTMD8R_SS Posted March 31, 2012 Report Posted March 31, 2012 Not sure about the part# but you will need loop lower mounts on the shocks whit the DJM arms. Quote
cmoney23 Posted March 31, 2012 Report Posted March 31, 2012 Ill tell you the part # today, By belltechs are scheduled to come in today. Quote
BlownFogger540 Posted March 31, 2012 Report Posted March 31, 2012 Not sure about the part# but you will need loop lower mounts on the shocks whit the DJM arms. the loop style is for stock AWD , eye bushing style is for the DJM arms Quote
T-Bag Posted March 31, 2012 Report Posted March 31, 2012 310400 is correct, I have the box here and just checked to confirm. Quote
cmoney23 Posted March 31, 2012 Report Posted March 31, 2012 310400 is correct, I have the box here and just checked to confirm. Well thats different from the part # i just got. Here's the ones norcals just sent me for the front that go in the 3"djm arms Part # 10103B Quote
T-Bag Posted March 31, 2012 Report Posted March 31, 2012 (edited) Good point. The 310400's are for spindles, my mistake, I had just woken up when I posted lol. Edited March 31, 2012 by Bad Ass Silvy (see edit history) Quote
BLOWN SS/T Posted March 31, 2012 Author Report Posted March 31, 2012 Ya the 310400 is for the stock arms, and I was almost going to order those but thought about it. So 10103b I was super close, those would be .5" shorter then the 10104b, which probably wouldn't make to much of a difference. I'm gonna get all this stuff ordered, when I'll install it though is a whole other story lol Thanks eveyone Quote
cmoney23 Posted April 1, 2012 Report Posted April 1, 2012 Also the stock bolts that go into the bottom of the shock DO NOT WORK! There to big. So i went to a hardware shop and got some bolts. Only $4 for bolts, nuts and washers. Quote
NORCAL SS Posted April 3, 2012 Report Posted April 3, 2012 (edited) ive been using the belltechs i sent cmoney for years now. DO yourself a favor just pm me all your questions i deal with the sss trucks daily lol btw dont use the 101104is they are to long the position at ride height is better on the others i sent cmoney. Edited April 3, 2012 by NORCAL SS (see edit history) Quote
cmoney23 Posted April 3, 2012 Report Posted April 3, 2012 Dude those belltechs are so money. Like night and day difference from any other shock ive used. Quote
NORCAL SS Posted April 3, 2012 Report Posted April 3, 2012 Dude those belltechs are so money. Like night and day difference from any other shock ive used. you didnt use the djm supplied bolts? Quote
cmoney23 Posted April 3, 2012 Report Posted April 3, 2012 For the shocks? Was i suppose to get some? Lol. Well i bought some. Only costs me $4 Quote
NORCAL SS Posted April 3, 2012 Report Posted April 3, 2012 For the shocks? Was i suppose to get some? Lol. Well i bought some. Only costs me $4 yes the djm kit comes with new bolts which are used with the belltech front shocks i sent yah. OH well its done now lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.