Silverad0 SS Posted April 16, 2012 Report Posted April 16, 2012 (edited) just wondering if anyone has any tips, i couldnt find a ''how to'' but I've got a pretty good idea of what I'm going to do, thanks Edited April 16, 2012 by Silverad0 SS (see edit history) Quote
The_aSSet Posted April 16, 2012 Report Posted April 16, 2012 Wideband and boost are simple and could probably do them without instructions, idk about fuel press. though Quote
Silverad0 SS Posted April 16, 2012 Author Report Posted April 16, 2012 Wideband and boost are simple and could probably do them without instructions, idk about fuel press. though yeah pretty simple, fuel pressure is easy too, i was just wondering where everyone is drilling through the firewall at Quote
The_aSSet Posted April 16, 2012 Report Posted April 16, 2012 Go through the rubber grommet under the dash above the brake pedal feed the lines through with a wire hanger Quote
Silverad0 SS Posted April 16, 2012 Author Report Posted April 16, 2012 Go through the rubber grommet under the dash above the brake pedal feed the lines through with a wire hanger ok thanks, thats the info i was looking for Quote
mx622 Posted September 8, 2012 Report Posted September 8, 2012 yeah pretty simple, fuel pressure is easy too, i was just wondering where everyone is drilling through the firewall at theres a junction box under the driver side dash if u un clip it and slide it over theres a metal circle u can drill through. Quote
juriha Posted September 8, 2012 Report Posted September 8, 2012 No need to drill anything, like asset has shown. I have all 3 gauges mentioned. Was pretty straight forward... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.